You are using an out of date browser. It may not display this or other websites correctly. You should upgrade or use an alternative browser.
towel rail
A towel rails radiator or a heated towel rail is a feature designed to heat towels before using them. For many years, European hotels have used them as combined towel- dryers/racks. The towel warmer is a bathroom heater suitable for both drying and heating towels and the environment. There are two versions: traditional ones that are plumbed like a radiator with water heated from a central boiler, and electric ones where an electrical resistance heats water or oil contained in the unit
I have been asked to change a rad to a towel rail in a new build bathroom
As you can imagine it’s 10mm plastic out the wall
Has anyone got an image of 10mm plastic into a towel rail so that I can show the customer how it will look if I just swap as they have asked?
Do I have any options other...
Hi all, I am new here and looking for some advice.
I recently installed a towel radiator in the bathroom to replace the old radiator. The towel radiator will not heat up. So far I have tried:
Turning off all other rads
Bleeding all rads
Checked that TRV and lock valve are fully open
Closed...
Hello, I would love some help sorting out a cold towel rail. The whole thing is cold, including the pipes leading in and out. We have had it about three years and it used to work but hasn't worked for ages, nor has the radiator also in the loft which I will post about separately.
I have been...
I recently had the plumber round because I had to have a new thermostatic valve on one radiator, another radiator wasn't working and the three way valve was faulty. It turned out the pump had to be replaced as well, but in getting the problem found all rads had to be turned off. I turned off the...
Hi folks,
Installing a new towel rail and it has two valves at the bottom that screw up into the towel rail with 90 degree valve taps on them, when I ptfe and tighten them it all works fine, they just reach fully tightened position at wonky directions.
How can I ensure they tighten at nice 90...
Hiya
I’m new to this forum and in need of some advice for my new home please!
The bathroom has a chrome heater towel rail radiator and at the bottom on each side there is a valve...I’ve tried adjusting them both but they don’t seem to do anything so I’m just intrigued as what their purpose is...
I turned the central heating on tonight for the first time since the Spring but the towel rail in my bathroom won't heat up. I must have turned the rail off a couple of weeks ago, when I attempted to add inhibitor. After trying to follow an online video on how to add inhibitor I gave up and...
Hi, I've just watched a video online on how to add inhibitor to central heating. I know I've got to turn off both valves at bottom of towel rail first. I did the left hand one easily, but I'm struggling with the right hand one. The one on the left had a cap which came off easily and I then...
Hi all,
I'm new to the forum and this maybe not the right area to post so if wrong, please admin relocate.
I have an electric towel radiator/rail in the bathroom and it's leaks water when it is turned on. I was told by a plumber that these radiator's are not repairable and it was better to...
We had our house re-plumbed about 9 years ago with a sealed system with solar thermal panels. (We also had new boiler installation 5 years ago). Wanting to re-decorate the main bathroom I was surprised to see on removing the towel rail that the air vent plug at the top was corroded (the sealed...
Hello
I will be fitting a heating towel rail in a bathroom with plasterboard walls. The room is being tiled at the moment. I need some good fixings to hold the towel rail. I usually use grip it fixings but these might be hard to use with the tiles. Can anyone recommend some good fixings for the...
Trying to fit a couple of adapter bosses like this....
Into the bottom of a heated towel rail.... problem I have is that it only seals when fully tightened, but the side spigot then doesn't line up with the pipework. I have tried (10 turns) of PTFE tape, but the boss still can be easily...
Hi Laides & Gents,
I'm a DIY'er so please excuse any fundemental errors :D
I am considering buy something like this to put in a bathroom.
antique brass towel rail
I'm concerned that the heat output might be too low and also that it may be hard to find adapters/connections to plumb the thing...
Hi all, wonder if I can pick your brains for a minute please....
I've recently installed a new radiator and towel rail in an old loft extension with no previous heating but I can't for the life of me get the towel rail tho heat up.
I've Tee'd off from the 1st floors (floor below) flow and...
Hi all
Please can anyone reccomend a supplier for a chrome / stainless towel radiator 500w x 800 h please?
I am trying to find one with the highest output preferably.
Thanks in advance!
Evening,
I am fitting 1.1m towel rail into a very small en-suite
you will see the original plastic pipes with the valves on in the picture. Is there a valve I can but for the towel rail that will fasten onto these valves without having to drain the system ?
Thank In advance ,
Andy
Durham
Hi all!
im doing a bathroom refit and the heating is a single pipe system. They've a 3 zone set up - cylinder, downstairs and upstairs. Wireless controls and a new system boiler was fitted about a year ago.
Mall I want to do is add a towel rail in the bathroom But the rad in there has a funky...
So, the DeLonghi towel radiator I got was a crock; swarf overpainted and the thread wouldn't take a valve; so I've been getting a few prices from all the usuals but not sure what to go for. It'll be a 1500/1600x500 curved in white.
City Plumbing suggested a brand I've never heard of called...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.