Hi, does anybody know what gas is in the freeze master's pipe freezing units, mine could do with a check and a top up. My local aircon branch said they might be able to re-gas the unit if it contained a gas they had. Thanks in advance.
Hi there
I just bought a Novopress ACO103. I attached a picture of the machine and the jaws. Can someone tell me what fittings can be used with these Jaws? Im new to press and these seems to be alot of different names. Connex banninger, m press, v profile etc
Any help you can and links would...
Evening All,
I've just had a mare of a day digging up a kitchen floor trying to re-route pipes. Can anyone recommend some kind of pipe detector that will detect pipes in concrete?
Jock
After the plumber changed the expansion vessel, the boiler was leaking even worse leading it to being condemned. It is quite old, so I suspect it was on its last legs anyway. Still, he was banging it quite a lot, and I just wanted to check there was a good reason for him to do so. Thanks.
Does anyone out there have experience of a water CONDITIONER - I don't want a water softener installed and I wondered if these really work or just a gimmick?
I would appreciate any information/reviews from either owners or plumbers please.
Hi, I'm in the process of buying the fittings for my new bathroom and I'm trying to find a combo toilet/ vanity unit. The one i'm looking for is the darky navy one the second image on the gallery on mabathrooms .co.uk . I spoke to the guy who owns ma bathrooms and he said that the customer...
Hi
Scenario,..... I go to install my new Washing machine and the little shut off valve has Seized solid and i can not access the mains water shut off valve,
In the past i would bend the fill pipe in half and put a jubilee clip on the bent section while im working on it.
Is there a specific...
Grohe kitchen mixer with new - fangled tool free fixing. Had 2 now, both with problems on the clutched plastic backnut - just keeps slipping and turning, not gripping - tap is about as solid as a fresh mackerel.
They are trying to make it easier for diy / handyman but usually it's the water...
My bathroom tap is dripping water, I want to change the tap valve, but I don't know the valve size, if somebody familiar with the type of tap, please tell me the valve size. Thank you in advanced.
My Irwin pipe bender has lost the retaining nut for the central bolt and the 12mm we have on site aren't the right pitch.
Does anyone know what type of 12mm nut to get?
Irwin don't, I've asked.
No replaceable parts on their benders.
well thought I'd try one - thinking would enable me to remove nozz without touching the electrodes - its a Regin and pretty rubbish as the inner spanner fits the nozz snugly enough but the outer is too big for the nozz holder.....ah well ..what a waste
Plumbing tools are essential for anyone doing their plumbing job. We also have tool talk on the Tilers Forum here and we have Electricians tool chat here!
Does anyone out there have a JTP shower or JTP taps installed? (previously known as Just Taps Plus).
Have you found a JTP shower and taps durable and reliable for years after installation? And straightforward to install?
JTP is being offered by a number of our local bathroom retailers and...
I work for a company that makes silicone dispensers and we're running a small focus group in Hungerford (UK) on 14th June to get feedback on some new products. If you have any tips on how to find local plumbers who can help, that would be great.
We're offering free lunch and a free cordless...
What's with the lack of sds max adapters for diamond cores.
I see countless sds plus bits as well as sds plus to keyed chuck adapter but I can't find any sds max bits.
Any one any ideas
Hi, I have a Hansgrohe T30 thermostatic cartridge (98282000) that I need to clean or replace, but I can't remove it. I've spent ages Googling this, but I just can't find the right tool to help - it's probably a custom Hansgrohe tool. Can anyone guide me? Thanks!
I don't live near a city and need to figure out how many rods of 56% I need to solder 3" copper to copper and come copper to stainless steel. I thank you for your time.
Hi all where can I get a aco 202 serviced/ repaired and then callabrated, having a real pain trying to find someone to do this,for such a well know tool thanks
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.