You are using an out of date browser. It may not display this or other websites correctly. You should upgrade or use an alternative browser.
master
MASTER (Mobile Astronomical System of Telescope-Robots) is a Russian network of automated telescopes in five Russian cities, and in South Africa, Argentina and the Canary Islands. It is intended to react quickly to reports of transient astronomical events. It started its development in 2002 and it is in fully autonomous operations since 2011.On 17 August 2017, an autonomous MASTER telescope in Argentina successfully recorded a collision of neutron stars some 130 million light-years away.
I thought I'd create a master thread to move all of these similar threads into, over time like.
If your central heating doesn't work
boiler doesn't work
radiators not working
radiators or heating system is cold
thermostat wont work or respond
Then post a reply in this thread. Rather than us...
Afternoon,
I have a virtually new one of these for sale, they are now £2,060.00 new direct from Freeze Master or Broughtons. This used Freeze Master 690E Pipe Freezer 110v is used for freezing pipes from 15mm up to 61mm (2" iron). It comes with 7 pairs of reducers 15, 22, 28, 35, 42, 49, 54mm...
Hello. I have lived in this circa 1990, split floor plan house in FL for 23 years w/ no plumbing problems. Recently, slight amounts of grey water sporadically back up in the master tub. Timing is unknown—never actually see it happen, however the dirty evidence is there. Plumber has used...
I have a Vaillant ecotec plus 838 boiler and yesterday morning I used the shower in my master bathroom and it was working fine with plenty of hot water, however that evening I went to have a shower and there was no hot water, so I tried the bath and tap in that master bathroom and there was no...
Hi, does anybody know what gas is in the freeze master's pipe freezing units, mine could do with a check and a top up. My local aircon branch said they might be able to re-gas the unit if it contained a gas they had. Thanks in advance.
Hi All,
I've got a recurring really bad/strong smell coming exclusively from the 1st floor Master Bathroom and En-suite (Ground floor and top floor bathrooms are fine!).
To help explain, I've added two photos showing the layout/setup below, in which i've tried to show the soil pipe layout too...
Hello, and thanks in advance for reading my essay! I'm hoping to get some unbiased advice on the best way forward.
I'm currently going through a permitted development application for a dormer loft conversion which will create a large master bathroom which will have both a whirlpool bath and a...
So I’m called out to fix a toilet that isn’t flushing. It is a concealed cistern within a box.
When you press the button, the flapper comes up a tad without flushing. The outlet of water then pushes the flapper right up and does not sit back down again, so continuously flows into the pan...
Hi all,
Freeze master 280 or Rothenburg rofrost 28??
Which is the better and why??
I have read that the clamps with bungee straps on the freeze master can get into awkward spots but what's the reliability like on both?
Figure if I'm going to be spending around £800 I may as well ask the people...
Freeze Master 350D machine. A bit hit and miss, hence the price - could do with servicing, or it's possible to send them to Freezemaster for complete overhaul. £200 including carriage.
I think one of the arms on my Freeze master may be failing? It seems to take longer to freeze. Has anyone had theirs serviced and how much does it cost?
Thanks in advance.
Got to go and repair one of these where the top and bottom oven are both very unresponsive and either fully on or turn themselves off. Anyone have any past experiences before I go eyes on.
Hi plumbers, I am popping here today to ask how do I solder a clean join? For example I am currently in the process of creating a lamp for my living room out of copper pipe. I started to solder today and realised I'm crap :smile5:. I cleaned the pipe and the elbows and fluxed, but no matter how...
Honestly are they worth the money? I keep looking at them wondering if one will save me time. I always have a couple cans of freeze squirt on the van don't tend to use a great deal.
Has anyone got one and its it of much use
got a job to look at above dual fuel cooker, there are some issues with the hob, 1 not igniting, and one only sometimes, one is sooting up badly and has a yellow flame, cleaned it out injector looks ok . cant take top off to inspect further because the tenant has tiled down to it!!!!! so he has...
Beware when you buy the white boxed fluid masters as they've supplied a load with the seal washer missing so the siphon just let's by.
Found out after fitting one and having to go back to plumb center for a replacement and costing me an hour of my life!!!!!
Just a heads up..
Hi everyone,
I joined this forum for some professional advice. Can anyone tell me please how far the 22ml pipe should run from a flow master tank on a pressurised system. The person who installed has fitted only 12inches before reducing it - is this ok?
lynda100
Thread
flow
master
pipe
pipe size
pressurised
size
system
Installed Atkins Tank Master 7 months ago. Client reports leak from poly tube. Only noticeable because level rises when pin pulled out and oil use minimal,(Property empty). Loss about 12mm per fortnight.
When installed poly slid on nipple without heat. Thought of cutting poly off nipple and...
was caught out the other wk stripped a cistern and fitted as I always do fluidmaster kit float and flush assy refitted cistern and screwed and sealed to wall - come to fit push button and the hole in the lid was to big the button just went through ended up making a washer from an old basin waste...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.