Search the forum,

Hansgrohe T30 thermostatic cartridge (98282000) extractor

Post new thread

Discuss Hansgrohe T30 thermostatic cartridge (98282000) extractor in the Plumbing Tools area at PlumbersForums.net

T

tonymorris24

Messages
37
Hi, I have a Hansgrohe T30 thermostatic cartridge (98282000) that I need to clean or replace, but I can't remove it. I've spent ages Googling this, but I just can't find the right tool to help - it's probably a custom Hansgrohe tool. Can anyone guide me? Thanks!
 

Attachments

  • IMG_4291.JPG
    IMG_4291.JPG
    527 KB · Views: 12
I managed it in the end, and for anyone one else looking in the future the tip is to leave the silver/plastic nut and the c clip IN PLACE. Keep turning the nut anti clockwise and it forces the cartridge out.
 

Attachments

  • IMG_4290.jpeg
    IMG_4290.jpeg
    418.9 KB · Views: 8

Reply to Hansgrohe T30 thermostatic cartridge (98282000) extractor in the Plumbing Tools area at PlumbersForums.net

Similar plumbing topics

B
Brass tap body is leaking.
I have attached an image of the brass body within a tap. Having replaced a cartridge which has cured a leaking tap, I can see that there is a small leak from the brass body which can be unscrewed. Is there a seal behind the body? Thanks.
Replies
2
Views
296
Bp89
B
F
  • Question
No Hot water, Fixed and Broken Again Ideal Logic 24
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold then would get hot water most of the time. Changing the flow cartridge about 2 years ago (when I moved in) solved this problem enough to suffer it as...
Replies
2
Views
123
Lou
Lou
jamespipe
Plumber recommendation for heat pump HWS installation
Hi, My current hot water system needs to be replaced. Anyone got any suggestions or can recommend any plumbers around Derrimut area that won't rip me off? An office guy recommended me to apply for government rebates and get it installed through timetosave.com.au. How reliable is this...
Replies
6
Views
286
oz-plumber
O
Stigster
Does anyone know the name of this model of Roca toilet?
Hi guys. I'm trying to identify a toilet model before ordering a seat for a customer. I went to what used to be a Roca stockist (they no longer are) and one of the guys there reckoned it might be "The Gap". I went to the new stockist and the guy there disagreed it was "The Gap" and that he'd...
Replies
2
Views
136
Stigster
Stigster
S
Advice needed for a mixer Spray for kitchen ?
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
111
Lou
Lou
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock