Hi folks,
I've fitted 3 new urinals supplied with cistern,auto siphon etc. Now when I first fast filled the system everything was ok,water flowed into all 3 urinals perfectly,now since that,the cistern just fills up & overflows outside.Ive changed the siphon & same again.Ive took the cistern...
I am looking at instructing a commercial gas safe registered and plumber to start works in moving an existing plant room and also expand it.
Requirements:
Moving two ACV direct hot water tanks , adding one more
Installing 6 accumulators - piping a header
Tank
Preparing and install riser for...
Hi,
Hope i can get some advise regarding this issue. As the title says am getting this loud clunking noise from my hot water cylinder which appears to happen when the hot water is on or hot water tap is running. It only recently started last few days. The system is a Kingspan Tribune XE...
Podium Plumbing is a modern, up and coming brand that prides itself on offering a high quality, local and friendly service, located in Elmswell, just outside Bury St. Edmunds, Suffolk.
We specialise in boiler, and heat pump installations, along with full bathroom renovations and full new build...
Hi, first post, go easy on me ;).
I'm having a radiator removed totally as the wall its sitting on is coming out. I've read online that you can just cap off the pipes 3 inches or so from the Tee junction or completely remove the Tee junction and replace it with straight pipe. I'm really just...
Hi...just recently passed my CCN1 course at Logic in Northolt....looking to find with work with a established Gas engineer.
I live in Hillingdon, currently work shifts so early starts are never an issue.
we are based in Hendon, NW4 and are looking to take on a plumber / heating engineer. Salary from £28,000 but based on experience. Our main criteria is you will need to be gas safe or have the gas qualification. We will supply a van. If your interested please message me
Could somebody tell me how you remove the circular clip and rubber seal from a leaking flush pipe connection at the bottom of a Geberit low height concealed cistern. Also is it possible to replace the seal with the cistern and WC in situ?
Has anyone got any experience with their EPS 400 board system please?
I’ve just laid a zone and when I got back to the manifold I cut the pipe to the right length. When I did, there was a heck of a lot of pressure built up in the 16mm pipe. Now the pressure is out of the pipe it seems the that...
Hi
Looking for some advice. Once a week I have to turn off the water supply and clean the inlet of the hot water on my shower. It is a pressurised heating system and no other hot water appliance is blocking only the shower.
I have attached some pictures. Is this a shower problem or do I need...
Level 3 Plumber looking to help someone out on Weekends to gain domestic install experience. i have worked in ocnstruction 1st and second fixing for 5 years.
I can drive and also have a Gold CSCS card. please PM me if you are intrested
I’m a Level 3 NVQ Qualified plumber who worked in the construction industry for 5 years. I’ve worked with all types of materials and have many skill sets and tools
I am looking to broaden my plumbing experience by helping someone on weekends on the domestic side of plumbing, I am not looking...
I have a couple of concealed slimline cisterns.
They have started to leak water into WC, this is 100% not down the overflow pipe, as water level is well below that.
Took it out cleaned all … still the same (or worse if anything) …. From empty the infill ‘torbeck type’ starts filling, all is...
I've recently found out I have a HIU (heat interface unit) in my new build flat. I've been searching the web for info on how they work, but none of them answer my main question - does HIU work by providing heated water direct from a central plant into my flat, or is the heat generated by it used...
Anyone able to provide some help with evo smart heating system?
Just moved house on Wednesday and 2 errors showing ….one the utility actuator needs reset and the other is a cons fault hot water valve actuator.
what does this mean and how do I fix it? Please
I'm looking for a number of Plumbers/Fitters who have CSCS cards and are adept with screwed copper piping and solder experience.
This is 3 month contract positions working in the building services sector on schools, colleges etc.
Locations available: Manchester, Preston, Blackpool and...
Hi,
My external stop valve is located in my rear garden. It is under ground and very old (1970). I am building rear extension and It will be in new extension. My water line is a shared line that provides water to 2 properties before and 1 after my property.
I have been trying to locate the...
Hi all,
Hope you are all well.
My name is Henry and I am Dorset based, and looking to get into the Plumbing trade. I will have completed my Level 2 Diploma in Plumbing in August this year, and have already signed on to the Level 2 NVQ as well as my Unvented and Water Regs certs, to start after...
Vacancies within our Plumbing Team at City College Norwich
Full time, £23.789 - £34,606 per annum dependant on appointment
An exciting opportunity has arisen to join the City College Norwich Apprenticeships Team. Due to rising Industry demand we currently have vacancies for full time posts...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.