Questions and plumbing advice in the Gas Engineers Forum - This is a PUBLIC Gas Engineers Advice Forum..
Some popular plumbing forums: Plumbing Advice - Plumbing Tools - Plumbing Courses & NVQ's
Forum Prefix Filter
I went to an ideal instinct were the hot water was cycling hot and cold. Upon inspection the flow pipe on the boiler was getting hot instantly as the hot tap was run. Indicating the divtor valve isn't moving all the way across when there is a hot water demand. I have past the job on to ideal as...
Hi, thanks for any advice, I'm about to change the pcb on an alpha intec system boiler. The fault code suggests intermittent voltage supply. Visually the case is brown stained almost directly where the transformer is located and a resistor looks like it's been getting very hot on the board. Are...
Hi everyone,
I’m so tired my actual job so I’m looking for new challenges and opportunities.
I always have been hardworking and open to learn new skills but once I came to England I’ve stopped investing in myself. Don’t know really why but 3 years I doing something what I actually hate...
I have just passed my ACS and am looking for some kind of zipped folder for my gas books/forms/stickers that's easy to open and take on the road.
can anyone suggest one?
anyone been on a gas safe registration inspection event?
If your an engineer in a firms gas safe. Can you view the gas safe magazine online?
Hi,
I've got a rewire job next week.
The current setup, old cast iron boiler with pump over run, (currently wired so pump over run isn't working).
There is a (new) 2port and pump to the cyl with cyl stat with bypass.
There is a bronze pump for DHW
There is a (big) pump for the CH. (And...
Morning. I'm new to the group. Been to a ferroili optimax 25c locking out in f02. Checked the leads and all. OK. Changed the ignition board on gas valve cleared the fault. But when you call for hot water the drayton valve calls for heating and when you call heating calls for water. Only 3 plug...
Morning. I'm new to the group. Been to a ferroili optimax 25c locking out on f02. Checked the leads and all. OK. Changed the ignition board on gas valve cleared the fault. But when you call for hot water the drayton valve calls for heating and when you call heating calls for water. Only 3 plug...
Hi all, I've had a read of similar threads and am going through my own decisions at the moment.
Spent 8 years at BG and currently work for a manufacturer earning around 40k. Fed up of doing 3 times as many jobs per day as would be reasonable for a self employed engineer and having to rush...
Fitted a Vaillant 838 Eco Tech plus combination boiler to a property 6 weeks ago. all fine.
Customer called in to say that the boiler had locked out on F54 and F28. Reset did it again a few hours later, then been fine since.
I attended today to check a few thing:-
1. Gas pressure at the meter...
Got a customer in a RPH after replacing a old morco OF permanent pilot LPG water heater. There after basically the same thing but with electronic ignition (battery or similar).
I'm a bit out of touch with whats available or even if any Open flue ones still exist to buy new, or are they all now...
Hi Guys
For reasons unknown I had to create a new account ...
A question for the commercial gas guys, does anyone know where I can get manuals for Dragon air warm air units, spoke to Elan but nothing left apparently.
Cheers
Marty92
GSR Dom & Comm
logic f2 error. Checked the condensate, I wonder why
Second job of the day
Called out to a Worcester HighFlow 440 with a C1 error code.
Third job of the day
Called out to a Worcester HighFlow 440 with a C1 error code. (in a loft).
Anyone else had anything like this?
Could someone work out total KW input for the following applying the diversity factor.
36 KW combi
24 KW combi
Cooker 12.9kw
It would appear according to gas Safe that my original assessment was wrong that they had exceeded badge capacity of a U6 as I didn't apply diversity factor.
Now the...
Ideal logic plus 30 kw, gas rated at 21 kw net on hit water. Inlet pressure 21mb at boiler, flow rate 12 lit pm, temp 40.3 degrees. Have checked, gas valve, injectir internal boiler pipework for blockages. Fga readings fine, boiler gas rate on central heating 23.5 kw net, service mode gas rate...
Have a28c approx 10yrs old, vertical flue, plagued with random E5 faults. 18 months ago full service kit replacement all was good. Its now back with E5!
Only thing i could find amiss was on h3 (full load) co2 8.2, adjusted back to 8.8 andas it seemed to conk out on hot water i hope thats will...
A domestic Gas Standard pre-payment Meter was exchanged for a Gas Smart Meter (SM) and then connected back to the pre-existing pliable/semi-rigid/anaconda connectors.
I believe this is illegal and breaks laws and regulations when this was done on 30 March 2017.
But my Utility company who had the...
Good afternoon.
Just after some advice on this boiler. Heating is working fine, no issues at all.
The issue is with the hot water. It will fire up no problem then after about 30 seconds, cut out and fire back up again. I was thinking it was the diaphragm which i have changed and the problem...
Creating content since 2001. Untold Media.
Tags
Newest Plumbing Threads
-
Any advice for putting this shower in ?
- Started by Staggersandfalls
- Replies: 2
-
king of pipes no reply from private message
- Started by cjg
- Replies: 1
-
-
-
Why pressure gauge drop without leak
- Started by sanju pradeep
- Replies: 4
-
Hot water so hot tap and shower via our hot water tank
- Started by thecar
- Replies: 4
-
-
Running copper pipework above / across a Gas boiler?
- Started by kristeva
- Replies: 2
-
Installing pipework to avoid airlocks
- Started by Matt0029
- Replies: 1
-
DUK Pipes for thermostat shower fitted at different heights
- Started by Delforkids
- Replies: 2
-
-
-
SPorcelanosa KRION Attica screen 1.2m, anyone?
- Started by Sebastian T
- Replies: 0
-
Cistern filling one third of the way
- Started by dwaindigital
- Replies: 4
-
Boiler losing pressure only on central heating- Started by SnosRap75
- Replies: 6