The great big plumbers wish list thread.

[Kyle87]

Would be good if they sold experience by the bottle.....


Instead those with the experience end up hitting the bottle!!

 

[JCplumb]

I wish for it to be illegal to place a stud wall over floorboards without re-doing a joist and making it so you can access under the boards without smashing up 2 rooms. tyvm.

 

[Keefy]

I wish they'd pass a law that all washing machines must have wheels.

 

[SafeGasInstall]

Jase you will get all this with experience doing it

Thought of a few today,

1. A tool to tell us where to drill through a joist so that it is straight
2. A clip that holds pipe up while soldering
3. A tool to stop movement on pipes whilst soldering
4. a tool to push pipes so that they dont pull out when soldering
5. some way of cleaning pipes when you take them apart so when you put a different fitting on it is easy to put back on.
6. an app with all the most important regulations on it, cutting joists etc
7. a toolbox that tells you when you are out of flux, glue, solder, wire wool etc
8. a gas bottle that tells you when you are down to 1/4 full

 

[R1CKY]

Thought of a few today,

1. A tool to tell us where to drill through a joist so that it is straight
2. A clip that holds pipe up while soldering
3. A tool to stop movement on pipes whilst soldering
4. a tool to push pipes so that they dont pull out when soldering
5. some way of cleaning pipes when you take them apart so when you put a different fitting on it is easy to put back on.
6. an app with all the most important regulations on it, cutting joists etc
7. a toolbox that tells you when you are out of flux, glue, solder, wire wool etc
8. a gas bottle that tells you when you are down to 1/4 full

2+3. Improvise, use tools, offcuts of pipe etc to make wedges to hold pipes in position when you solder.
4. Assemble the pipe and fitting, then pinch it slightly with a pair of grips, that will hold it in place and stop it falling out.
7. Keep two of everything and replace as soon as you are down to one.
8. You get a feel for how much is left by the weight of the bottle and also see no.7!

 

[jase158]

I think the point is being missed here, these are things that would be easier with a tool or invention. Everyone is suggesting to make do with grips or wedge or pipe but how much easier would life be if you had a tool to do it instead of making do?

 

[SafeGasInstall]

2+3. Improvise, use tools, offcuts of pipe etc to make wedges to hold pipes in position when you solder.
4. Assemble the pipe and fitting, then pinch it slightly with a pair of grips, that will hold it in place and stop it falling out.
7. Keep two of everything and replace as soon as you are down to one.
8. You get a feel for how much is left by the weight of the bottle and also see no.7!

Like a said experience is need it

 

[Guest123]

I can help you with the holes in joists Jase. Ill look out the PDF that I've got and email it to you if you want it.

 

[gassafe]

This is the best drain down hose you can get.

How is it any better than my hose lock anti kink hose?

 

[TBServices]

How is it any better than my hose lock anti kink hose?

I'd also like to know