Discuss Motorised valves dissapered in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
J

jambo

Rippin out a system boiler today to fit a combi been all over the housr no motorised valves ? Help please
 
Have you looked behind the sofa?

You may very well find there were never any to begin with and that the system relied solely on timeclock and boiler stat.

Just out of interest you are gas safe registered aren't you?
 
Is there a particular reason why you're changing the hot water supply from cylinder to combi?

Just curious.
 
Where have you. Been Jambo ?
What boiler are ripping out ?
 
its jambos apprentice he gave me his pass word and username for useful information when i need it wait till he sees this i will tell him in the morning he asked me to rip out and i told him i was compentent to do so should have asked him i guess and ye he gas safe and am dead
 
Be cearfull what you type,You still have to be gsr to rip out unless someone caps the gas off mate
 
hi all jambo her thought i was doing the right thing ther helping that wee s!!t out but ther ya go ye the reason for getting rid of HWC two new bathrooms going in with mixer showers that clears that one up plus no control over heating & hot water together with it being GRAVITY FED NO VALVES LOL. finished today full powerflush each rad that was none of this switch on and off i know u are out there. WORCESTER 42CDI MEC PROG HARD WIRED SAT CUSTOMER OVER THE MOON . HAS NOW LED TO HER CHANGING ALL RADS 10 BY THE WAY AND VALVES AND A NEW BATHROOM GOD WERE GOOD FREE POWERFLUSH WITH EVERY BOILER SWAP.
 
Status
Not open for further replies.

Reply to Motorised valves dissapered in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi everyone, my first post here so go easy on me... 😄 I have Danfoss HPA2 motorised valves fitted to my heating system and one of them is giving...
Replies
1
Views
291
Hello. I've just replaced our old Potterton EP2 CH controller with a Drayton Wiser HubR (& peripherals). The old backing plate wasn't...
Replies
1
Views
317
Hi Folks, Please advise as i wish to change a motorised valve connected to a heat only gas boiler: Turn off the boiler Turn off the...
Replies
3
Views
765
I have tried hard to get similar to the first class satchwqell /Sunvic SML type revolving type valves instead of the quite short lived spring...
Replies
0
Views
403
I have a conventional system, Potterton Prima Boiler, into a Pump into a Motorised Valve that feeds the Radiators and/or the pipes in the Hot...
Replies
4
Views
540

Newest Plumbing Threads

Back
Top