Search the forum,

Mobile card payment

Post new thread

Discuss Mobile card payment in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
6

64degrees

Gas Engineer
Messages
48
Just wondering if anyone using these for smaller payments and if any system seems better than the rest. Seen an old thread but there seems to be more choice and lower fees now. Would it just sit in the glovebox gathering dust, or would it be useful? Anyone using them or got an opinion?
 
Was looking at izettle - with no ongoing costs seems a no brainer. Nice pic btw, reminds me of altern8!
 
Thanks 46 degrees in a loft, how quick summer goes!
 
Another vote for iZettle. It does get used quite often for small jobs. But I pass the charge onto the customer so they don't like using it for larger jobs.

What other ways do people accept payment? I just do cash, card or internet transfer.
 
Status
Not open for further replies.

Reply to Mobile card payment in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

J
Old pipework size in bathroom
Hi I've had to cut hot and cold feed to re route for bathroom feeds. The 22mm Copper pipe hot feed is slightly smaller then my 22mm Copper. Solder fittings just slip over it and are really loose so I gather this is old imperial pipe, so I shall use a 3/4 to 22mm coupler. However on the...
Replies
3
Views
505
JonesJ89
J
nrgopks
How to seal a sump pit with irregular, uneven liner
I am seeking some advice on how to seal up my sump pit. I currently get condensation on the walls and floor around the pit, and in the past there has been accumulation of mold on the walls, due to about 6" of standing water in the bottom of the pit. The air also smells bad and is somewhat...
Replies
2
Views
264
nrgopks
nrgopks
G M
Smart Thermostat Install - Worcester Highflow 440
We have recently moved into a property which has a Worcester Greenstar Highflow 440 Standalone Combi gas boiler. This appears to be a relatively old unit however, it is still in great working condition and has been serviced on a regular basis. I'd like to add a Nest Thermostat to control the...
Replies
2
Views
513
G M
G M
G
Milano Baya Shower Tower
Morning gents and gals, I have a Milano Tower Shower about 15 years old, where I have a couple of issues :- 1. The shower head has seen better days and I would like to replace it, however, the BPS seems to be a 1 inch or so not the usual 1/2 inch and the grey fitting at the top does not want...
Replies
0
Views
524
Gsysaxman
G
M
Motorised valves from China
I have tried hard to get similar to the first class satchwqell /Sunvic SML type revolving type valves instead of the quite short lived spring return type valves. I saw an advert from the Hearken company who either make these or buy them in. The only problem they are BSP threads so adaptors are...
Replies
0
Views
363
Miicklemus75
M
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock