Discuss limescale in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
L

lesmuscroft

does anyone have experience of Limescale Eliminator Systems.They appears to be simple to fit and eliminate. existing limescale as well as preventing further build up in the future.
 
Bit like smoke and mirrors really!! Some plumbers fit them (as they are simple to install) making the customers feel good about keeping limescale down. A bit like closing the stable door after the horse has bolted!!

Only way to prevent limescale is a water softener.
 
Status
Not open for further replies.

Reply to limescale in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi, I have a Aqualisa Midas thermostatic shower that has a very stiff temperature control. I have taken off the control knob and unscrewed the...
Replies
4
Views
2K
This is probably a basic one, but just wanted to check. Hot water flow to all taps has gradually been getting slower over time and the...
Replies
4
Views
918
Hi. I have had a significant build up of limescale in the pipes taking old water from the shower / bathroom sink and sewage from the toilet. This...
Replies
8
Views
2K
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new...
Replies
1
Views
331
Think I know the answer is no but asking just in case. I have a solvent weld bathroom waste with lots of connectors in it that disappears into...
Replies
4
Views
691
Back
Top