Discuss Know what valve to turn , in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

kris

Plumbers Arms member
Plumber
Gas Engineer
Messages
4,744
Saw this on facebook and thought this is for engineer and customer alike to watch , brilliant,

https://youtu.be/y-uK1c5Jyfs
 
Brilliant.

I shall apply that philosophy in my work today.

Looks like my Employer is heading for a big bill.
 
Last edited:
That's quality Kris, we should all put the link on the bottom of quotes!
 
It does confirm that we probably shouldn't tell those that don't know which valve to turn without being paid. So I guess that's the end of the public forum then. Ah well at least there's the arms.
 
I'd like to think that in a nuclear power station there would be someone on-site who knows what valve to turn to avert nuclear disaster... Rather than relying on mr arrogant to come on over from Germany!

Secondly the video is obviously fake as he turns a gate valve... And we all know that gate valve would have been seized!

But it's a nice video none the less, the main point is indeed that as professionals we should get paid for what we know & stop selling ourselves cheap!
 
Obviously it ain't real it's just the principle of the story that's brilliant. Of course there's probably 20 guys that would know that place and valves inside out .
 
Obviously it ain't real it's just the principle of the story that's brilliant. Of course there's probably 20 guys that would know that place and valves inside out .

You've ruined it now Kris - I thought it was real!
 
Sorry it might be real , I honestly don't know , lol
 
Obviously it ain't real it's just the principle of the story that's brilliant. Of course there's probably 20 guys that would know that place and valves inside out .

There may have been 20 guys who knew which valve to close, but they were all probably running around like headless chickens (or Corporal Jones) and with tunnel vision.
Unable to think clearly and or afraid to do anything that might later cause a disaster and their own death either in an explosion or firing squad.
It's probably something they've not practised for.

Stepping in from outside with a clear head and a plan is what (allegedly) solved the issue.
 
Last edited:
Status
Not open for further replies.

Reply to Know what valve to turn , in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hey all, Looking for some advice. My mother recently had her boiler changed but in the process the water had to be turned on and off as you would...
Replies
5
Views
275
I have tried hard to get similar to the first class satchwqell /Sunvic SML type revolving type valves instead of the quite short lived spring...
Replies
0
Views
396
I recently read a post / comment whereby there was a recommendation that if you are away from your home more than 24 hours, then you should turn...
Replies
8
Views
471
Customer complained of hot water tank getting hot when no demand Y plan system couldn't see any issues so I watched it Timer set to CH only, HW...
Replies
13
Views
2K
Hi I have a 4 zone / 7 loop UFH system. 2 zones (4 loops) always get hot when the system is on when the zone thermostats and actuators are...
Replies
14
Views
1K
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock