- Messages
- 9
Thank youIf you are installing it as a one pipe then ensure that bypass is removed as it will have been left installed if it was piped up originally as a two pipe.
"Designed to allow working with one pipe or two pipe oil feed systems.
Dispatched units are normally factory set for single pipe systems at 8 Bar oil pressure, in order to obtain two pipes systems it is necessary to unscrew the return plug and insert the bypass screw supplied and then screw in the return hoses."
That's the little grub screw inside the hole where I will disconnect the return pipe isn't it?
And hopefully last question, will the blanking plug listed above fit that pump?
Thanks again I owe you a beer!!