Search the forum,

temps

Le Temps (literally "The Time") is a Swiss French-language daily newspaper published in Berliner format in Lausanne by Le Temps SA.
It is the only nationwide French-language non-specialised daily newspaper of Switzerland. Since 2020, it is owned by the non-profit foundation Aventinus.
According to the Research Department on Public Opinion and Society (FÖG) of the University of Zurich, it is of "high quality".

View More On Wikipedia.org
Recent contents Top users
  1. D

    Tip - Ideal Vogue Max - Separating DHW and CH Temps

    Hi everyone, My Ideal Vouge Max 26 was installed a few years back, all works fine. Its an S plan setup, but I've always been amazed that the temperature for the water tank and the central heating were the same and 'couldn't' be separated (according to the Ideal registered plumber who installed...
  2. Steveo100

    Advice please. Glow worm energy 25c shows "no" re flow temps.

    Had glowworm do some warranty work on it a few months ago. Wondered if he has locked it ? Would be great to check the water and rad flow temps. Couldn't find anything in the manual. Would anyone be able help please ? Tia
  3. JonJonnyJonJon

    Advice on water feed to tank and rads (different temps)

    Hi Everyone, (not sure if my last post worked so apologies if this is a duplicate). I have an Ideal Boiler (vogue max system 18) and a MegaFlo Water tank. On the boiler I only have 1 dial to turn the water temp up or down (no separate dials for heating and water). On the water tank, I can...
  4. E

    Renovation Issues - Hot toilet and extreme shower temps

    We've recently just moved into our recently renovated home and we've found out that we've got some interesting plumbing issues, the first one is that both the upstairs and downstairs toilets are hot (the cistern water is hot) and radiating through the toilet and wall (concealed cistern), and the...
    • emg9393
    • Thread
    • america crossover hot hot toilet hot water cylinder hot water pressure hot water supply issues renovation shower temps toilet usa
    • Replies: 2
    • Forum: USA
  5. M

    Boiler overheating High Temps

    I have a overheating issue very few days with my boiler when the UFH is on have to reset CH and HW all working perfect. My UFH is polypipe with a Baxi boiler. I have had a baxi engineer out to look at the boiler who has advised that the UFH needs balancing as the heat from boiler is not...
  6. F

    New boiler flow and return temps

    Hi all, Just had my new boiler installed. Went from a heat only with hot tank to a combi boiler. Its a Ideal Logic+ 30 and in the menu it shows sensor values. I understand there should be a large difference between flow and return values but quite often when running there is only a 5 degree...
    • friendlyaviator
    • Thread
    • boiler flow flow and return new boiler oil return should sounds system temps
    • Replies: 26
    • Forum: Plumbing Jobs | The Job-board
  7. siricosm

    Different boiler temps required for hot water vs radiators.

    Hello, I have a non-combiboiler (Vaillant), non-condensing, non-vented with an integratedexpansion tank, that is used to heat radiators in my house. It ismaybe 10 years old and I am hoping to get a few more years from it.All of my water is heated with electrical point-of-use heaters, whichis...
  8. D

    Controlling Vailant boiler CH and DWH temps independently

    Hi ​to all, found the forum on my quest to better my current heating system. Seems the most knowledgable forum so a good start. Ok So my house is a 1970's 4 bed detached, upgraded cavity wall and loft and new double glazing. The system consists of a valiant Ecotec pro 630 system boiler...
  9. A

    flow return temps

    just got a new attachment for my analyser which measures temperatures of flow and return pipes now i'm wondering what is a healthy temp difference across a plate heat exchanger? what temp differences do boilers condense? when you turn the hot tap on how many degree rise on the flow pipe is...
  10. C

    x400 indirectley causing system to run cooler?

    I put some x400 into my old system to try and cure a kettling issue. after a few days it seems better but the system doesn't seem to heat up as well. ideas.
  11. R

    Condensing bolier flow and return temps - effect on rad sizing?

    Had a quote for complete new CH system including Worcester Greenstar 28i Junior. Not sure I totally understand this, hence asking here: I was pretty surprised at how small the rads spec'd were as I thought condensing boilers needed as low a return temp as possible? The installer (WB...
  12. D

    Different CH zones at different temps

    Dear All, We're doing a remodel of our mid terraced house. After much agonising to do with low water pressure and flow, we're getting a Sundial S plan plus system with a conventional boiler. The plan is to have thermaskirt on the downstairs on one heating zone, the standard rads on first and...
    • dgrs
    • Thread
    • different forum plumbing temps zone zones
    • Replies: 2
    • Forum: Plumbing Zone
  13. D

    Installer installed undersized radiators

    Hi, I had a new central heating system fitted last year and always thought it was cold but because I didn't really use it, as the property was being renovated at the time, I didn't think much of it. I've finally got round to measuring the temps this year and it's freezing! The temps are...
  14. S

    Rad temps

    Hi allGot a custard who thinks that there's something wrong with a few rads cause there not hot enough, I mean they put there hand on and it doesn't take the skin off so they think it's not hot enough, even though there not cold! So what is the temp of a rad supposed to be when boiler on full...
  15. C

    combi HW flow rates should restrictors be used to increase temps.

    30kw combi is rated at around 12lpm of hot water. However this is honly for a 30deg rise. So if incoming is 10deg, outgoing is only slightly warm at 40deg. If flow is reduced then water gets hot, the boiler then modulates to the temp selected (max 65deg happrox). Does anyone here use flow...
  16. L

    flow & return temps

    Hello,I have a checked the flow & return temps on the CH pipes, but getting very little difference flow is 23 return is 20.Is this correct ? the rads seem to get hot at the same time so system balanced ok?.Any advise plse .
  17. D

    Storage tank and L8 troubles!

    Hello, i've just started work in a new building that has never had L8 readings done and now i'm taking temps the cold water is coming out at around 25c, I have measured the temps at the incoming tank(s)-we have two side by side- and it's 16.4c direct out of the mains and in the centre of the...
  18. R

    Rads too hot to touch

    Worcester Heatslave 20/25 oil fired boiler 4 years old, diverter valve renewed 3 months ago. I don't seem to have any control over my radiator temps they get seriously hot too hot to touch, not sure if boiler c/h stat is working how can I check, I have turned it fully down and it has no impact...
  19. I

    Flow and Return Temps at the UFH Manifolds

    Can anyone tell me what the average flow and return temps should be at the manifold of a UFH?
  20. P

    Oil boiler goes to lock-out at minus temps.

    Hiya guys, all advice welcome on this one. I have a potterton statesman oil boiler which is fed by oil from an outdoor oil tank. Since the very low temperatures we,ve experienced in the uk the boiler won,t work. Our engineer says the potterton is in perfect working order. The kerosene doesn,t...
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock