HALL of SHAME PHOTo`s

[ShaunCorbs]

I don't know your the one with the tools out[emoji6]

not mine pic of good workmanship tho

 

[village idiot]

It's ok Shaun, wait till you finish before you dispear

 

[Tonycane]

Who needs joists??

 

[ShaunCorbs]

Who needs joists??

concrete floor, over battened

 

[village idiot]

View attachment 23743

Classic.

 

[ShaunCorbs]

Classic.

what boiler tho thats the question ?

 

[plumben]

why o why

i like the mix of spf pipe and copper push fit fittings, and i hope thats a concrete floor under there

 

[Koogatubac]

SimonG - sure you follow these around just like i do?
Like really... How hard is it to do a decent install...

 

[Koogatubac]

Condensate is just left open under the unit

 

[Tonycane]

Is the gas supply in tectite?

 

[gmartine]

why o why

Sean, is there a story behind the pic as normally the tools are nowhere near such a bodge unless of course he's walked or been chucked off.

 

[ShaunCorbs]

Sean, is there a story behind the pic as normally the tools are nowhere near such a bodge unless of course he's walked or been chucked off.

on his face boox pic of his work on a new heating system

 

[SimonG]

http://images.tapatalk


I have a sneaky feeling who's work it is. The fittings sort of give it away.

 

[ShaunCorbs]

http://images.tapatalk


I have a sneaky feeling who's work it is. The fittings sort of give it away.[/QUOTE]

before you say no its not my work :D :D

 

[SimonG]

before you say no its not my work

No somebody very local to me

 

[Riley]

http://images.tapatalk


I have a sneaky feeling who's work it is. The fittings sort of give it away.[/QUOTE]

Ooh who who surely no one on here???

 

[Koogatubac]

Sorry simon, you replying to mine? Theres 2 plumbers who use tectight fittings near us, super plumbers [emoji106] haha

 

[BLOD]

this is my favorite one from last week

 

[Riley]

What an abortion

 

[Tonycane]

 

[Riley]

Dear lord, that is all

 

[dom brennan]

went to a job today and seen this, flex to a shower with a plug on the other end plugged into a socked

 

[Sparkgap]

View attachment 24081

went to a job today and seen this, flex to a shower with a plug on the other end plugged into a socked

Nail in place of the fuse? Bet the water doesn't get very warm :grin:

 

[dom brennan]

more than likely haha

 

[Crinkmeister]

Melt-tastic!!

 

[Tjdservices]

This was a radiator in a customer house, it was in there new extension

 

[ShaunCorbs]

View attachment 24187

This was a radiator in a customer house, it was in there new extension

wasnt my fault timber was off the wall by 2 inches

 

[DrainMedic]

There's a hell of a lean on that wall and radiator! Pipe looks perfect though! :53:

 

[voivod]

Is that a new ceiling heater???

 

[stevetheplumber]

We did ten rads like that on a job we fixed timber on the walls to hold pipes in place when we first fixed when we came back the floors were screeded and pipes all over the place builder wouldnt pay extra for alterations so they went in much like those

 

[spanner]

Frightening.. bit scary movie..

 

[Atouchofgas]

Saw this

 

[Atouchofgas]

View attachment 24494
Saw this

 

[newcastle phill]

Belta

 

[Alex Knight]

Looks alright to me...

 

[ShaunCorbs]

least you get your 300mm to the gutters that way

 

[spanner]

Looks alright to me...

Downside up and rubber hose and clipped defo NCS

 

[spanner]

Looks alright to me...

Downside up and rubber hose and clipped defo NCS

 

[AlexGas]

Found this little beauty buried in a hardcore, gas, live. Ripped it out.

 

[plumben]

Not My Photo, Seen it On The Tools (Facebook) but had to share it, think someone didn't have and straights

 

[jonnyswamp]

Not My Photo, Seen it On The Tools (Facebook) but had to share it, think someone didn't have and straights View attachment 24715

Didn't have 2 ft of pipe, only offcuts
Either that or decided he needed a couple expansion loops

 

[jonnyswamp]

Not My Photo, Seen it On The Tools (Facebook) but had to share it, think someone didn't have and straights View attachment 24715

Didn't have 2 ft of pipe, only offcuts
Either that or decided he needed a couple expansion loops

 

[Riley]

Ha ha need to upsize the run just for all those elbows. Brilliant

 

[Rickster123]

I like the fact he measured it perfectly so that the pre payment card fits in the slot!

 

[plumben]

Didn't have 2 ft of pipe, only offcuts
Either that or decided he needed a couple expansion loops

And then he ran out of Solder elbows and used compression on the union

 

[Atouchofgas]

Compression on the union is common, allows meter to be blanked quickly

 

[tolly]

went to fit a new expansion vessel today in a school today, wasn't expecting this :nono:

old one had exploding sending top half of vessel straight through the ceiling of plant room and through that refrigeration pipework above that has now been repaired.

 

[Riley]

Wow. Good example of how they can go

 

[PriestyUK]

Whilst out in Dublin on a night out I saw this

 

[PriestyUK]

View attachment 24791

Whilst out in Dublin on a night out I saw this