Discuss GCH Circulating pump supply & fit cost? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
B

brinylonshirt

Hello
New to this plumbing bizzo and looking for some advice before I call someone out. I need a new circulating pump for my central heating system. The original one overheated due to having spent 5 years surrounded by towels etc! :stooge_moe: and is now bin-worthy. I remember the old one cost about 55 quid and it`s a Terrier which are apparently nla? Can`t remember how much I was charged however, and was looking for some idea from you professionals?

Any help greatly appreciated.
 
Are you asking the labour charge for fitting a central heating pump?
 
How much to fit a pump?

how longs a piece of string? There are two may variables, as with any job. Depends on area, location of pump, if valves are required, the list is endless.
 
Bog Standard pump change is usually 1 hours labour but how often are things bog standard? Last pump change I did turned into 3hours as when I went to fill back up there was a blockage in the cold feed, ended up cutting out and replacing most of the pipe work.
 
OK. I`m in Bristol? The pump is in an upstairs bedroom, very easy and simple access? No valves need replacing. That`s the end of my list. :smile5:
 
Everything is very easy then.....

get a plumber to have a look and do the job.
I've heard "easy job" a load of times.
 
I said the access was very simple and easy. That`s it.
 
Pump prices have rocketed. You now have to use a smart pump which alters its own performance according to temperature and loading
 
Pump prices have rocketed. You now have to use a smart pump which alters its own performance according to temperature and loading

Say that again went for a pump other day for a hot water return nearly fell over !
 
Status
Not open for further replies.

Reply to GCH Circulating pump supply & fit cost? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Been renovating my house and in the process improved insulation and removed quite a few rads. I've also installed more than half downstairs floor...
Replies
3
Views
761
Hi Everyone, thought I'd pick your brains on some ideas I have for controlling a DHW secondary circulation pump circuit that I'll be installing as...
Replies
13
Views
3K
    • Like
Hi all, We recently purchased a house and nothing seems to work correctly here, I've spent weeks rectifying issues. Plumbing, electrical...
Replies
47
Views
5K
Hi everyone Cross-posted this from the commercial section, as it looks like nobody has commented on anything over there since mid January. I...
Replies
15
Views
2K
Hi everyone I have a dead pump on my DHW This monster pushes water around the heating coil of s 210 litre unvented cylinder. That's all It...
Replies
19
Views
3K
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock