Search the forum,

Discuss Any ideas - immersion heater in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
C

Chris R

Anyone any ideas on removing an immersion heater that will not shift

Yes, I do have a good quality immersion spanner and I have tried an overnight soaking with WD40 and the bl**dy thing will not budge.

Thanks
 
try heating or useally in that situation drilling them out is the easyest.
 

Attachments

  • Photo-0031.jpg
    Photo-0031.jpg
    98.8 KB · Views: 42
  • Photo-0032.jpg
    Photo-0032.jpg
    98 KB · Views: 25
Status
Not open for further replies.

Reply to Any ideas - immersion heater in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

I've recently replaced an immersion heater for a direct cylinder, for 2.75-3kW. The new one seemed to be working a week before I got a callback. I...
Replies
5
Views
211
I have read of hot water cylinders being heated with a dual element immersion heater. The main principle being that a shorter element heats the...
Replies
2
Views
390
W
Hi all. So I have an OSO Super SXD 180 immersion heater and it is pouring a huge amount of water out of the cold water pressure relief valve...
Replies
2
Views
593
    • Like
I recently posted to request information about supply of a "dual Immersion heater". Two members kindly replied with helpful advice. I tried to...
Replies
2
Views
387
B
Hi everyone, I have a Santon Premier Plus PP120E (unvented direct immersion heater) fitted with two thermostats, which provides hot water to taps...
Replies
0
Views
411
Bridog
B
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock