You are using an out of date browser. It may not display this or other websites correctly. You should upgrade or use an alternative browser.
cold radiator
Cold Sassy Tree is a 1984 historical novel by Olive Ann Burns. Set in the US state of Georgia in the fictional town of Cold Sassy (based on the real city of Harmony Grove, now Commerce) in 1906, it follows the life of a 14-year-old boy named Will Tweedy, and explores themes such as religion, death, and social taboos. An incomplete sequel to the novel, Leaving Cold Sassy, was published in 1992 after Burns' death.
Hi,
We have a issue with our heating, where the radiators upstairs are roasting hot, yet the radiators downstairs are stone cold .
We had a powerflush done the other day which didn't help ...Two radiators out of four (including lock shields and TRV's) on the ground floor where changed, but...
Hi we had a baxi18 installed June. From day one the plumber could not get all rads hot and to stay on. They came back and changed pump, no difference changed all trvs. Now, the problem is this They all come on and are hot after about 45mins one goes cold and does not come back on . There...
Hi all. Hope you are doing well.
I have been asked to install a whole new system which they want all the drops chased into the walls for the rads. Usually I don't bother with this but they are willing to pay good money for it. Does anyone do it? What pipe do you use, and do you go vertically...
Hi, looking to pipe a new build, oil boiler, multilayer with radiators(low temperature).
The home owner hasn't provided me with any plans and although I know how I'd like to pipe I don't want it to be too expensive as they're a young couple.
I'd love to feed two Manifolds, upstairs and down...
Bit of advice needed. Searched but couldn't find anything about Combi's and UFH with no rads.
Customer wants to have a combi, UFH but no radiators. Is it a good idea to have a single radiator on the system to provide a heat dump? Or should an auto-bypass suffice? If an auto-bypass then close...
Hi, just went to swap the first of three imperial sized rads (750 wide by 500mm) to a metric 700*500 double convector and like a Doyle have found I didn't plan for the copper pipe to be another 10/15 mm in from the wall to meet with valve.
Before I go ripping up floor boards, what will be the...
Afternoon all. Im looking to have a quote for supply and install of 9 radiators. Also, we would like to take advantage of the green deal offer as a secondary measure which includes supply and fit of TRVS. I wondered if it would be possible to incorporate a quote utilizing this scheme?
Cheers Dave
Hi, i hope you can shed some light on this , Combi Boiler is located in the loft and was installed March 2020 on existing pipe work/ radiators , i topped up (2) radiators up stairs in October 20 it took a lot of water!
Boiler pressure is set to 1.5 bar (cold resting) and never drops. But found...
Hi all,
Hoping someone can help me out with this. I have added 3 new radiators to a system and replaced 2, the 3 added are small 400 X 600, initially upon refilling the system all worked fine except one 400X600 which was the furthest from the boiler and one other which was a replacement...
Hi there, ufh is being installed on the ground floor of a new build highly insulated dormer house, 120m2 on ground floor plus 90m2 on first floor.
The design flow temp will be 40 deg C and I'm thinking of using radiators sized for 40C on the first floor,
Should I consider underfloor heating...
Hello guys, I looked at heating system yesterday. A large 2 story house with 2 story extension at back. The rads to extension never worked. Its a 90,000 btu oil fired boiler. Pipes from boiler are 22mm (should be 28mm) coming from shad near house. From what I can see I think flow and return...
Evening all, not sure if I should be asking sparkies ? I have a qualified and experienced gas fitter installing a new system in a small rural cottage. I am having a friendly discussion about the location of heated towel rad. You open the door to the bathroom and to one side is the...
Hi,
Not long in a new build house and getting to grips with the heating and everything else.
We've a Nibe F4020 heat pump, UFH for downstairs heating and rads/towel rails for upstairs.
The upstairs is on a single zone with a thermostat on the landing (makes no sense to me, but whatever.)
The...
I am replacing two radiators. The new radiators will be larger and I will need to change the pipework.
The existing 8mm microbore comes out horizontally from block walls (the floors are solid). I will need to extend at least one pipe to accomodate the new rad. Basically my question is what...
Hi All,
I need to replace two radiators in on of my rooms. The size does not seem to be available from normal suppliers. I think it is an imperial size 32 wide by 16" high. I need to replace as they are not in great condition around the threads. You might see the corrosion in the image I will...
I am a homeowner after some advice about power flushing a central heating system with microbore pipes that seem to be blocked.
When I switched the boiler on in October, 3 of 12 radiators never warmed up and 2 other radiators became only lukewarm. My plumber concluded the pump in the 11-years...
Hi there I’m brand new to this forum and really need some help.
my downstairs radiators can take an age to heat up. Sometimes they just don’t heat up at all. Other times they do heat up and all is good. Until I turn the heating down at night and the issues begins again the next morning. A...
I live in a 3 storey 5 bed house. Moved in beginning of March.
Every radiator is hot bar one - the double 2m wide 700 high one in extension. Had a heating engineer come out in May, clean system and fit magnaclean.
My system is a pressurised cylinder which is on the top floor.
I took that...
A rad was moved to the other corner of the spare room with plastic 1/2 inch pipes and lagging. It hasn't heated up since. There is 16 rads on this system and every rad on this system heats up apart from this rad.
I've tried to balance it all out however still nothing! I've even turned off...
Morning all,
I'm new and shiny here and seem to have developed a heating problem this morning. Any pointers for a quick resolution would be appreciated as my ears are now hurting! :rolleyes:
I have a Vaillant Ecotec Plus 630 driving rads, hot water and underfloor heating in some of the house...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.