Hi,
Just looking for some input on the best method of installing a new WC on the ground floor, I hope the picture explains what is required.
The old WC is being removed and the new one needs to be connected to the soil pipe, not sure if an inspection chamber is necessary or if it can be...
Hi Everyone
Have just had a call from someone who is having problems with there hot water & also needs a gas certificate, I cant do the job as im snowed under at the moment & the guy needs someone within the next few days, If anyone is interested please get in touch 07598271758
(small...
Hi guys,
Thanks in advance and I really hope you can help me.
I am enrolling at college to do the gas engineers course. They said to me they maybe able to help with finding placement so I can complete my portfolio, but I thought I'd take the initiative and ask on here if there were any very...
ContractorForum: Need a little advice: Hi there im new here and am about to do a course on tiling but need to find out a bit of .. http://bit.ly/6nADPZ
More...
Follow us on Twitter.
I have an ecotech boiler installed with indirect vented DHW tank and open vented CH. The boiler is 2 years old and works fine. The controls are via a basic Drayton two channel time switch with analogue mechanical thermostats fitted to both DHW and the CH system. I want to improve the control of...
Only used once to save me draining down a one pipe system in a mansion to change a rad and valves so (2 x 15mm sleeves used only once, larger size unused.) Comes with one full tin plus one half tin. Worked very well. Cost £140 . After £70 plus postage for quick sale.
basically this...
Quick question, The pressure build to over 3 bar when heating is switched on so presumably the Vessel has gone
Where is the vessel situated on one of these and are they a nightmare to do?
BEXI 80ECO
47-075-05
Thanks for any advice
Plumbing & Gas Courses, Education & Advice? MET // Hellaby, South Yorkshire
Hi there,
I had a general query on the trade as a whole - and wondered if anyone could help me please?
Its regarding the prospect of retraining through MET in Hellaby, South Yorkshire (highly recommended...
Hello,
My Cold Water Control Valve Pack is leaking. See attached picture for info.
It has some limescale build up at the bottom and leaks for around 2 hours every 24 hours. Its leaking slowly at the moment.
Does this mean I need a new part or is there something I can do to stop it from...
My soil stack is 5 metres away from the kitchen waste outlet. I'm going to connected a washing machine and a dish washer through a washing machin waste trap with two spigots connected. The kitchen waste will have its own trap and I'll put a tee fitting below it with a pipe run of 2metres for the...
Hi need some advice regarding hard water areas what is the best soultion regarding water softners having a customer in a hard water area with having to replaced the imersion heater regular with the limescale attacking the elements need a good quality water softner there seems to be alot of...
Just a heads up on the new RM cylinders
The last two rm cylinders I have got from Rays have come with a new digital high limit and thermostat.
they seem a lot better than the old ones, but be warned! They have a anti legionella function. On first power up they will Fire the cylinder up to...
I was looking at getting on site with an agency but has anyone had experience of osat whilst working as a plumbers mate.Do site managers have any issue with doing this?
Ferrolli F30 Domestic hot water cuts out??Sirs,I have a Ferrolli F30 combi boiler. The domestic hot water supply from it goes cold about every minute for about 10 secs then heats up again, usually when in the shower.Annoying, but it may fail altogether eventually. This appears mainly when the...
Hi,
Due to my house layout, I'm trying to figure out various options to install a new hot water system. After much back and forth I think I'm going to go with an unvented cylinder with an accumulator to boost the flow. This is because a vented cylinder (which was my first choice) would result...
SafeClamp® incorporates strength, speed and style to provide a revolutionary ladder clamping system. A composite beam structure and stainless steel anchor hook which offers high strength whilst providing excellent corrosion resistance
BUY HERE
Hi guys, I know the analyser threads have been done to death but can't find much on the Kane 457. I'm looking at getting a new analyser and from doing a bit of research I have decided to go for a Kane, was just wandering if the 457 is worth the extra money or just stick with the 455. Cheers
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.