Search the forum,
Questions and plumbing advice in the Central Heating Forum - Also see on the electrical forum: Central Heating Systems..

Some popular plumbing forums: Plumbing Advice - Plumbing Tools - Plumbing Courses & NVQ's

Forum Prefix Filter

Apart from this site being TOTALLY SWAMPED with so many adverts one cannot access it properly, here's my lovely question, should I ever be able to read it. The good old 842, this one's an eco max, got called out to CH not working but DHW is, Now I done the normal, the div was shot, so changed...
Replies
0
Views
512
P
Hi, I have a new built house with the following floor heating manifold: https://www.robotclimate.com/media/amasty/amfile/attach/c9864db4135c6f26c6d9e41254816317.pdf In particular, I have the "District Heating PRO manifold" (Section 3.2). I also have district heating, and PVC floor. I have some...
Replies
0
Views
864
PierpaoloB
P
M
We are moving and want to convert the house over to fully electric and later possibly some solar panels. The house currently has warm air heating and the hot water is via tank and immersion heater. Do not want warm air so looking to future proof the place and spend a bit of money as the house is...
Replies
0
Views
669
Martin Sylvester
M
G
Hi, thx in advance if anyone has any ideas I've got a Worcester Bosch combi with Hive thermostat. Whenever the central heating turns on I get a beep like a gameshow buzzer, and then little rumble. Does the same when turning off. Never does this for just hot water. I had British Gas come out a...
Replies
0
Views
597
GL7781
G
My central hot water heating system has developed a very loud gurgle every time the heat comes on, so clearly has quite a bit of air in the system. It has a Taco Hy-vent automatic valve above the tank in the utility room and no bleeder valves elsewhere in the system. Should I just replace the...
Replies
0
Views
1K
M
Hi, I noticed the pressure this morning on my boiler was just below 1bar so I went to top it up, opened the loop and it just managed to hit over 1bar then just stopped increasing. Now the central heating looks like its on but all the radiators are luke warm even when temperature is 70 degress...
Replies
0
Views
798
MrDave
M
My air/water heat pump is stuck in cooling mode. For whatever reason it's parameters have changed to cooling only and turned itself to standby mode. I can't change the parameter now and the machine wont let me turn it on. Any Ideas?
Replies
0
Views
412
Conditions: nearly 10 year old boiler WB2B, heating mode off, DHW on or also in standby, Boiler shows no fault LED on, no new fault logged, room thermostat deactivated. Boiler gets odd attacks of suddenly turning on the fan 100%, then (gas valve and ignition are clicking?) potentially tries to...
Replies
0
Views
387
Hi all, got the above boiler that was installed in the house back in 2009 before we moved in in 2017. The boiler works as it should, it heats up the hot water and the radiators fine and everything is balanced. however it has started to act rather strange with the heating on. The boiler will...
Replies
0
Views
2K
Hi everyone, hope you're all well and hopefully someone will be able to help with a problem I have. The boiler seems to fire up with heating no problem at the start of a program but will randomly stop heating. There are no error codes on the boiler and the thermostat (Climapro 2RF) shows no...
Replies
0
Views
2K
E
I reckon if I did a survey of 100 heating engineers, asking what would they recommend for heating a granny annexe being built onto the side of my house, in place of the garage, most would give me a suggestion to put in a) an extension to the existing boiler rad circuit & electric water heaters...
Replies
0
Views
239
eco-heating options
E
U
  • Question
Hi all. Our Ideal Isar combi boiler wasn't igniting, so we had a plumber come out during the week to fix it. He said it was a dirty spark electrode (at least I think that's what he called it), so he fixed it and the boiler started working again. However, since then our water doesn't get...
Replies
0
Views
765
urbanrich
U
R
Hi having the same issues currently with back boiler, so far 2 different gas engineers have changed programmer and syncron motor to no avail although programmer change resulted in temporary fix. Coming back tomorrow to check it.
Replies
0
Views
315
Roseie
R
M
  • Question
Honeywell ST6400C Hi, my Honeywell timer is flashing and clicking when both water and heating switched to auto or on together. And nothing works. Works if one or the other on. Believe 3 port on way out, makes a racket changing over. I’ve ordered one and changing over tomorrow. Just want to...
Replies
0
Views
648
Mikegoldenballs72
M
  • Question
Hi All, my boiler starts to make some loud noises recently when running (a sound file is attached). A gas engineer will come around sometime next week. In the meantime, appreciate any advices on what could be the cause. Thanks very much!
Replies
0
Views
387
Hey, Looking for peoples thoughts.... Delivered kWhr cost of Kerosene is 13 or 14 cents (probably higher with an old oil burner like mine). I'm stuck for space for an air source heat pump / only have an enclosed yard for outdoor unit and i'd be looking at an install cost of 15k to 20k by the...
Replies
0
Views
512
Ideal combi 24 knob for off/hw/heating/reset needs replacing. I have new one but cannot work out where the spring fits in the new knob
Replies
0
Views
1K
D
Hi, I would really appreciate your help with this issue. I'm looking a wireless boiler thermostat with a receiver that is battery powered, or a battery powered thermostat that can read a wireless temperature sensor. The problem that i'm trying to solve is that my current thermostat is located...
Replies
0
Views
1K
Deleted member 115098
D
This is regarding the hot water, but I didn't have a clue where else to post it. We live in a 22 year old Barratt house, we have lived here since new. The start of last year, we had to have our hot water cylinder replaced as it started leaking (closed system). Because it was a different make...
Replies
0
Views
751
I
Velocity Rogue 5.0 for sale plus testo 760-1 digital multimeter. I purchased the bag 2nd hand (I’ve never used it) and the Testo new after completing gas course. £100 for both. Please email me if interested
Replies
0
Views
258
ITEMS FOR SALE
I
Post a New Thread / Question
Creating content since 2001. Untold Media.
OFFICIAL SPONSORS

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock