Search the forum,

zone valve

Post new thread

Discuss zone valve in the Plumbing Zone area at PlumbersForums.net

Status
Not open for further replies.
B

buckley plumb

has anyone used the corgi zone valve heads from toolstation they say they fit Honeywell - they are half the price of the Honeywell ones
 
I have fitted 2 of the new complete valves and they were much the same as any 2 port. Didn't disconnect heads though so not sure how easy it would be to retrofit.

Wouldn't normally use toolstation stuff, but custard self diagnosed and supplied (wasn't actually the MV it was programmer) ;)
 
Aquazone said:
I have fitted 2 of the new complete valves and they were much the same as any 2 port. Didn't disconnect heads though so not sure how easy it would be to retrofit.

Wouldn't normally use toolstation stuff, but custard self diagnosed and supplied (wasn't actually the MV it was programmer) ;)
Click to expand...
Thought they would save money?
 
Status
Not open for further replies.

Reply to zone valve in the Plumbing Zone area at PlumbersForums.net

Similar plumbing topics

N
Towel Rail Valve Advice please (35 Characters needed.)
I have had a look at previous posts and think I know the answer to this but just before I make it worse could I just check what you think about this one. Granddaughter just moved house and this valve decided to leak when it was closed. When open its fine. Normally I have repacked the gland on...
Replies
7
Views
217
Timmy D
T
T
Trying to source a dual-flush valve
Does anyone know where I can get one of these? Toilet is leaking into the bowl. This one pushes in with a half turn but I can't find one anywhere.
Replies
2
Views
213
Thomas J Marshall
T
johndave
Outdoor stopcock doesn't fully close
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
3
Views
292
exedon2
exedon2
B
What is correct toilet supply line
Hi. I need a new toilet supply line but don’t know the size type of the fitting at the shut off valve. It is not 3/8 compression. It is a plastic nut about the same size as the one going into the cistern but has a different thread. Attached is a photo. Can you advise. Thanks.
Replies
2
Views
208
ShaunCorbs
ShaunCorbs
M
heatrae sadia 25l 9004010.
Has anyone one fit or serviced one of these before; Heatrae Sadia 25l 9004010. It a 25 litre hot water storage cylinder.
2
Replies
39
Views
726
John.g
J
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Electrical Advice
Electrical News
British Standards in Tiling BS5389
Electricians Talk
Contractor Advice Forum
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock