Discuss Worcester rsf burner insulation burning....... in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

jonny5isalive

Plumbers Arms member
Plumber
Gas Engineer
Messages
320
Burner insulation was burning straight out the box. Stank and fga all over the place. Ends up brown front and back.

Replaced twice with same result. Worcester looking into it and getting back to me.

Ended up using some from one I took out.

uploadfromtaptalk1444713770073.jpguploadfromtaptalk1444713798274.jpg
 
It wasn't with a worcester but I had something near identical to this on a potterton suprima. Gas rate, burner pressure, inlet etc were all perfect. Few cracks in the insulation so I replaced them a few days later with genuine parts and when I switched the boiler on there was a horrible burning smell. Opened up the combustion chamber and the pads had turned from white to almost jet black. Called potterton and they said it was normal!!
 
How long ago?

My parts supplier said that they'd had a few like that and it was normal and they'd all do it. They'd spoken to a manufacturer of the panels and the material had changed.

Worcester said they'd never heard of it and would investigate so I've sent them back. Wait and see.

Thankfully this was in an outhouse and not inside their house as it properly stank after.
 
1-2 months ago. I actually called tech support twice to speak to a different person as I wasn't convinced but got the same answer.
 
seen the same on baxi 105s when you swap the cracked insulation panels, only started recently so I suspect they have changed the makeup of the new panels, just leave them to cook a while and the analizer readings settle down,
 
seen the same on baxi 105s when you swap the cracked insulation panels, only started recently so I suspect they have changed the makeup of the new panels, just leave them to cook a while and the analizer readings settle down,
Yes that's perfectly normal madam.

If you could just sort me out the money for the service whilst the smoke subsides.
 
Status
Not open for further replies.

Reply to Worcester rsf burner insulation burning....... in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hello all, I'm would like to extend an existing outside tap to another point in the garden. I'm about to pour a concrete patio and was hoping to...
Replies
6
Views
289
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is...
Replies
5
Views
560
Hi all. Hope you have all been keeping well. A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to...
Replies
9
Views
327
Every two weeks or so I have to go and top up the system because the hot taps are running cold. Boiler display is flashing 0.6 bar and I fill up...
Replies
2
Views
285
PSxxxxxx
P
B
    • Friendly
Hi, I've followed this excellent forum for several years but have never posted, so decided I'd better give some details. My status is the upper...
Replies
2
Views
254
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock