Search the forum,

Discuss Worcester Greenstar 28i Junior Issue in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Messages
4
Hi All,

I just have woken up to no heating and no hot water, The bolier is Worcester Greenstart 28i Junior) on the first instance i have checked the pressure on the boiler which was a little bit below 1, i have topped up to a bit below 2, the bolier had solid blue light on it before and after,

I have tried resetting the boiler no luck, i have tried switching it on and off from mains, no luck,

tried putting the thermostat (honeywell cm707 - at least it looks like it) to a higher degree but that didnt start the boiler,

Below the bolier i have the wireless controll from the termostat and once i press the button on it the boiler starts and heats the radiators and the water for a brief moment but then switches itself of,

It does not do any unusual sounds, i cant see any leakage

Off top: i have tried taking a shower while pushed the override button but got caught with the ice age cold water in the middle,

By any chance any of you have encountered a issue like this before, have you got any ideas how to sort it out?

Thanks
 
Does it do anything when you open the tap ?
 
And the thermostat is connecting to the receiver? Does it need batteries?

I have Exchanged the battery for new ones, not sure if it is connected, when i raise the temperature on the termostat it shows the connection icon from time to time,

Is there aby other Way to check if it is 100% connected?
 
Rip out the wireless technology
get back to basics to lessen the variables and wait for a few years till the manufacturers get their wireless system right, they are just experimenting on householders in my opinion
Rob Foster aka centralheatking
 
Need a gas safe engineer out if you’ve been through the basics. As there’s no hot water I’d be surprised if there was a thermostat issue
 

Reply to Worcester Greenstar 28i Junior Issue in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi bit of a weird issue, I installed a grohe bathroom tap successfully 2 months ago bought from screwfix. Last week the right hand hot tap makes a squeak noise as I turn it on or off, left tap is 100% perfect and noiseless. This grohe tap is like one unit, so no screw notch or way I can remove...
Replies
4
Views
158
Hi, I have a Worcester 28i junior boiler that has started to lose pressure, only when using the central heating. When using hot water I have no issue, however, when running the heating the pressure drops. Im looking for some ideas on what could be causing this. I have no sign of pipe leaks...
Replies
6
Views
148
Hello, I am seeking some advice, I have a POTTERTON PROMAX 28 COMBI Boiler and I noticed yesterday that the water around the house is no longer warming up. The heat exchanger has been changed 6 months ago, so I do not believe it is that. Does anyone have any ideas on what it could be? Thanks
Replies
4
Views
232
Hi everyone, Looking for a bit of advice, recently went to a job where heating was operating when called for however not for the hot water. I have changed the 3 port actuator Honeywell head however this doesn’t seem to have solved the issue, does this mean that the programmer is faulty? Or is...
Replies
8
Views
294
  • Question
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold then would get hot water most of the time. Changing the flow cartridge about 2 years ago (when I moved in) solved this problem enough to suffer it as...
Replies
2
Views
140
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock