F
flanagaj
Being a competent DIYer who has installed a fair few bathrooms in his time, it always amazes me just how poor the fittings are to connect the hardware to the sanitary ware.
1. Having to install a rubber gasket over the nut between the cistern and the pan. Surely, there is a better design than this?
2. Nice to see Bristan now have taps which you can part install, fit the sink and then connect the tap body. Ideal, as it means you can get a silicone gun in to seal the sink. Fitting taps from underneath is such a ball ache.
Now don't get me started on how hit and miss it is to not having a leaking sink waste!
1. Having to install a rubber gasket over the nut between the cistern and the pan. Surely, there is a better design than this?
2. Nice to see Bristan now have taps which you can part install, fit the sink and then connect the tap body. Ideal, as it means you can get a silicone gun in to seal the sink. Fitting taps from underneath is such a ball ache.
Now don't get me started on how hit and miss it is to not having a leaking sink waste!