Discuss Which Unvented Solar Cylinder in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
A

antsals

There are loads of the Unvented Cylinders on the market but which is the best?

I'm after a twin coil so I can plumb solar heating into it, indirect unit fed from boiler, 210 litres as I have a space constaint.

What do people with the knowledge and experience think.......who make the best?

Cheers,
Ant
 
Ask ten plumbers and you will get ten different answers.
Personally I have found the OSO, plumb center own branded, and the gledhills to be be very good.
 
I like the plumb centers own brand, fitted a few with no issues also the rm ones.

But you might as well be asking what flavour crisps we like.
 
Thanks for the replies......
I get the opinion that the manufacturers are as good as each other and not one system is a front runner. I was planning on the Gledhill SOL210I then suddenly had the thought I have no reason of buying that just that they make them in the UK.

Cheers
Ant
 
Try phoning Gledhill tech help line as an installer.

Last time I tried the premium rate tel number put me off for life. :59:
 
Decide what volume you would like.
Decide if you want a built in air cushion or an external vessel. Both have pro's and cons.
Decide if you want compression nuts on or you supply your own connections.
Decide what colour you like.

Buying a packet of crisps actually requires a bit more thought.
 
Status
Not open for further replies.

Reply to Which Unvented Solar Cylinder in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi, I'm looking to purchase a 300L unvented indirect cylinder to work with a standard heat only boiler. I may have solar panels in the future...
Replies
9
Views
697
Hi, I'm in my new build 2 years and the shower pump has died. I have an air to water unit downstairs is in the utility which I've been told is...
Replies
6
Views
269
Hello! I have a new Vaillant boiler being installed and will install a new cylinder at the same time. Our installer is recommending a UK Cylinders...
Replies
0
Views
1K
Hello, I am renovating a small bathroom in an apartment on the 5th floor. Heating is electric, no gas or oil. I have four (related) questions...
Replies
1
Views
785
Hi All, looking for some advice. I have ARISTON CLASSICO UNVENTED INDIRECT CYLINDER ST1 210 which has corroded at one of the main inlets and is...
Replies
0
Views
847
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock