Search the forum,

Discuss TP5000RF problem with programmes in the Central Heating Forum area at PlumbersForums.net

Messages
1
Good afternoon
We have a TP5000RF thermostat. We have programmed it to put on the heating at specific times during the day and night, however it keeps overiding these times and the heating comes on at random. Any advice would be gratefully appreciated
 
Is it due to this, from the user guide.

Option 34 - Select chrono-proportional cycle rate (DIL switch 5 set to Chrono) This allows the thermostat chrono-proportional cycle rate to be selected. It is only active if DIL switch 5 has been set to “Chrono”. Press + until Option 34 is displayed, use V and Λ to select required setting.

mine was doing it some years back and I think it was due to that, full instructions below.

 

Reply to TP5000RF problem with programmes in the Central Heating Forum area at PlumbersForums.net

Similar plumbing topics

Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
339
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
3
Views
252
My son has an apprenticeship interview for to become a plumber and heating engineer. The have said there will be a multiple choice exam for this for suitability. The thing is my son panics during tests/exams. Is there any book I can buy him to practice the multiple choice test for the exam? What...
Replies
3
Views
420
Hi All I have a leak coming from within my Mira Elite QT shower. It seems to be flowing from behind the switching Control. Any ideas what could be causing this leak. Already Changed the Pump Elbow as one of the clips had popped which was causing a second small leak, Any idea? Is it time to buy...
Replies
0
Views
234
Copper pipes, I think its fair to say, is not what it used to be, the copper is getting thin while the cost is going up. Meanwhile, plastic Pushfit seems to be getting better and better, cost and convenience was always better, but now the quality is to, have we reached a stage where plastic will...
Replies
2
Views
252
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock