Discuss Toilet pan fixings - What type of screws please in the Plumbing Jobs | The Job-board area at PlumbersForums.net
- Status
Used to use brass screws, but these come with slotted heads. Now use stainless steel.
Essential to screw into properly sized pilot holes otherwise heads will shear. Always wrap shank in PTFE tape or similar to cushion against ceramics. Supplement with silicone bedding.
Essential to screw into properly sized pilot holes otherwise heads will shear. Always wrap shank in PTFE tape or similar to cushion against ceramics. Supplement with silicone bedding.
- Messages
- 34,369
- Solutions
- 2
Concrete floor or wooden floor ?
- Messages
- 12,702
The old tricks still work best.
- Status
Reply to Toilet pan fixings - What type of screws please in the Plumbing Jobs | The Job-board area at PlumbersForums.net
Similar plumbing topics
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new...
Hi. I need a new toilet supply line but don’t know the size type of the fitting at the shut off valve. It is not 3/8 compression. It is a plastic...
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking?
This originally happened about 12 months ago and has happened 3-4...
I have had a look at previous posts and think I know the answer to this but just before I make it worse could I just check what you think about...
Hi all. Hope you have all been keeping well.
A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to...