Users can remove all display ads (not sponsors) for a small fee. Click for info (must be logged in)

Discuss Tiger loop connections in the Oil and Solid Fuel Forum area at PlumbersForums.net

Messages
578
My ageing tiger loop could do with replacing. All I can find online have horizontal connections whereas mine has the connections vertically the pipes coming in from below. I was hoping I could get a straight swap unit. Will i need to alter my pipework as well then?
 
Externally fitted. Attached is a photo. Thanks
 

Attachments

  • TL.JPG
    TL.JPG
    342.2 KB · Views: 12

Reply to Tiger loop connections in the Oil and Solid Fuel Forum area at PlumbersForums.net

Similar plumbing topics

S
Hi, I seemed to have a blockage in kitchen sink. A plumber came and cleared all the pipework that is visible inside my home (there was debris and...
Replies
2
Views
151
Sonya K
S
I want to reconnect some outbuildings to an existing water supply. The supply pipe is old 22mm MDPE and buried for a fair distance so not going...
Replies
1
Views
312
Hi, I have an old steel water mains pipe (approx 45mm) that I need to connect to a new pehd water mains (25mm). I can't get at it to create a new...
Replies
2
Views
236
Hi all. Hope you have all been keeping well. A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to...
Replies
9
Views
293
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4...
Replies
9
Views
426
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock