Discuss Suggest gas combi boiler in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
You want this indeck-keystone-massive-boiler-in-transit-reduced-size1.jpg stainless steel heat exchanger too

HTH
 
You want this stainless steel heat exchanger too

HTH

If you feel very rich, then you can always buy Worcester with aluminum which will corode in few years time. I prefer to make smart purchase to avoid such issues.
 
If you feel very rich, then you can always buy Worcester with aluminum which will corode in few years time. I prefer to make smart purchase to avoid such issues.

you wont have more than 10 - 12 years out of your boiler these days (combi) realistically
 
You can predict future?

Still - why would you buy inferior boiler if you have choice of other better ones?
 
You can predict future?

Still - why would you buy inferior boiler if you have choice of other better ones?

nope just going on current models and there not inferior main brand boilers
 
Worcester has aluminum heat exchanger, consumes more electricity, noisier. You don`t call it inferior?

They are hugely popular because installers can make more money on them +they invest ton of money in marketing. It doesn`t make boiler itselft any better.
 
This is not an argument, but discussion - whole idea of such forum. Facts are facts, I have compared boiler specs.

And why installers fit Worcester? Because parts are widely available, better profit margins compared to other makes, better tech support maybe. But again - it doesn`t actually mean its best boiler out there. I can understand its not easy to accept this fact, because you might be fitting 10 Worcesters a week.
 
Worcester has aluminum heat exchanger, consumes more electricity, noisier. You don`t call it inferior?

They are hugely popular because installers can make more money on them +they invest ton of money in marketing. It doesn`t make boiler itselft any better.

:D there not nosier,alu conducts heat better and doesnt matter if alu or ss both do the same and work in the same principle, and i bet if you ran each make of main man boiler you wont find much difference in elec cost
 
Status
Not open for further replies.

Reply to Suggest gas combi boiler in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi, I have I blend valve from Nu-Heat ( they bought it from Reliance, as per attached spec). I have dismantled the valve now 3 times and...
Replies
0
Views
366
  • Question
Hi all. I recently upgraded our CH system, but rather than the expected drop in gas consumption, Octopus is saying we're using roughly 30% more...
Replies
19
Views
905
Hi, Non-professional / knowledgeable person here. I'm a Brit in Romania who volunteers for a charity building an old peoples home for needy old...
Replies
3
Views
411
Hi All, Looking for a bit of advice on the best way to pipe this. - 24kW Worcester regular boiler in kitchen, approx. 9 years old - unvented...
Replies
16
Views
1K
Hi there, thanks for your time to look at this record long post!! I work on the operational management side or a small building contracting firm...
Replies
9
Views
1K
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock