Sok it to me ********s!!

[lame plumber]

never had an issue with them yet, so can't comment on their unreliability, as with all kit, it's normally installer error that is the issue.

 

[Irish]

View attachment 16971 Doh, why did it fall over

Don't see why people say it's an ugly boiler ? Looks no worse than lots of other boilers

 

[TBServices]

Other than the udderly ridiculous condense trap and the jig at the bottom, they're no worse than a DuoTec.

 

[gassafe]

SALUS.... SALUS did they upset you that much lol

Other than the udderly ridiculous condense trap and the jig at the bottom, they're no worse than a DuoTec.

Your right its just lames pipework that let it down lol

 

[Mike Jackson]

These have been put up before.


RIMG0008 by Mike Jackson1, on Flickr


RIMG0002 by Mike Jackson1, on Flickr


RIMG0001 by Mike Jackson1, on Flickr


RIMG0003 by Mike Jackson1, on Flickr


RIMG0012 by Mike Jackson1, on Flickr


RIMG0012 by Mike Jackson1, on Flickr

 

[lame plumber]

condensate !!! trap, doesnt have any washer or cap that can leak, which is a bonus in my mind and the jig could be better, but I prefer to use robo kits where possible to avoid the need for a jig at all, or if needed use the jig case to run pipes up the rear if needed.

 

[Destroyer2813]

Thought had already uploaded this one.

Could of connected up the machine for em as well

 

[lame plumber]

Your right its just lames pipework that let it down lol

here what is this about, pick on Lame night, when Croppies not here to protect me

and Mike has pictures an intergas does fit in a cupboard

 

[Ermintrude]

here what is this about, pick on Lame night, when Croppies not here to protect me

and Mike has pictures an intergas does fit in a cupboard

That's a walkin wardrobe

 

[solutions]

SALUS.... SALUS did they upset you that much lol

Nothing wrong with that salus clicks a bit loud when it switches otherwise very solid for the money.

 

[solutions]

Don't see why people say it's an ugly boiler ? Looks no worse than lots of other boilers

No worse than lots of other ugly boilers.

 

[AlexGas]

That was tight...

 

[Ermintrude]

Not gonna work with gas capped? Bit of a basic fault? But a spirotec? Crossovers look tidy. Would have run hot round under flow parallel to gas and tied it in higher up and fitted a doc .

 

[Whyme]

That was tight...
View attachment 17083

bends not elbows and a shock arrestor good call. what boiler was it needing an external bypass?

 

[Whyme]

I have upped this before. tis a solid fuel/gas boiler/thermal store combo. the laddomat valve and quencher are next to the wood burner. btw the flue is running up behind a stud frame and accessible.