Search the forum,

Discuss So, guess what they didn't do. in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

stani

Esteemed
Plumber
Gas Engineer
Subscribed
Messages
2,505
On a cold weekend, when nobody was around. This is an, after I had arrived photo.
IMG_2034.jpg
 
Filled up without turning the rad valves off by the looks of it
Or leaving the trv on frost setting and not capping it
 
Filled up without turning the rad valves off by the looks of it
Or leaving the trv on frost setting and not capping it

It was already filled up, then someone, nobody knows who! Left the Trv uncapped and it went extremely cold over the weekend, the trv then stayed open.
 
Heard of a plumber in Dublin had done the same on a new build no cap on TRV.Cold night,
Ye know d rest
 
Drayton trv opened on cold temp. Stupid things don't have a positive off!
 
OMG who's job is this? Tank fed aswell so keeps on coming, at least the F&E would have had a good flush out?
 
It is indeed tank fed, which is why I arrived at 9-30 and left at 3-30 after using a HSS wet vac all day, which was after I had dried out a socket circuit to plug the damn thing into
 
Status
Not open for further replies.

Reply to So, guess what they didn't do. in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Recently had a Viessmann Vitodens combi boiler installed, quite often when the adjacent cold mixer tap is opened the boiler starts for a few seconds! Can anyone tell me what is causing this? And how to cure?
Replies
3
Views
224
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
393
Hi all Noticed bad smell in my drain out side put my hand down and it unclogged it for now however I checked my sewer drain and after flushing my toilet a good few times nothing is going to the sewer so don't know is there a blockage or what way it works many thanks and advice would be grateful
Replies
3
Views
559
I want to reconnect some outbuildings to an existing water supply. The supply pipe is old 22mm MDPE and buried for a fair distance so not going to dig it up and replace it 😬. Question is can I use normal 22mm plumbing push-fit connectors to make the connection as finding 22mm MDPE fittings...
Replies
1
Views
296
Hi All I have a leak coming from within my Mira Elite QT shower. It seems to be flowing from behind the switching Control. Any ideas what could be causing this leak. Already Changed the Pump Elbow as one of the clips had popped which was causing a second small leak, Any idea? Is it time to buy...
Replies
0
Views
256
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock