Search the forum,

Discuss Shower outlet question!! in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Messages
62
Been to a job today and somebody had decided to use a street elbow and a soldered male iron for a wall outlet instead of using a standard back to wall elbow!

There is no way to change this without damaging tiles/plasterboard behind and the property is rented so landlord doesn't really want this done.

I was was just wondering does anyone know of a shower wall outlet with a female thread ? Or a removable thread so I can just use female side . Like this>> put preferably metal IMG_0604.jpg
 
Last edited:
Status
Not open for further replies.

Reply to Shower outlet question!! in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new...
Replies
1
Views
237
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason...
Replies
3
Views
303
Hello all, I’m replacing a concrete paving slab patio in the back yard. The original patio used 50mm deep concrete slabs on hardcore & sand. I’m...
Replies
6
Views
288
I was stupid enough not to check the position of the pipes under the tiles when installing a toilet and drilled right through the center of a 16...
Replies
0
Views
221
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock