B
brip
Hi all, I have a customer with a Stelflow unvented cylinder installed approx 18 months ago. All taps, showers, toilets are new and for use with a high pressure system. When a hot or cold tap is opened (90% of the time) there is a screeching noise in the pipework, it doesn't disappear by opening more than one outlet. I'm assuming the pressure is too high, but havent taken any readings yet.
The uv cylinder is in the garage and the cold water to the house is not taken from the tapping for balanced cold water (this has been used to feed the top up for the sealed boiler!)
Any suggestions graatefully received
The uv cylinder is in the garage and the cold water to the house is not taken from the tapping for balanced cold water (this has been used to feed the top up for the sealed boiler!)
Any suggestions graatefully received