Discuss Renew outside flue terminal in the UK Plumbing Forum | Plumbing Advice area at PlumbersForums.net

Messages
29
If I’ve had a whole new flue fitted to my boiler and going outside through wall. Should the engineer fit a new outside terminal as well. Or is this not needed?
 
Depends if it’s ok / sound I’m guessing the reason for the new flue is rusting ?
 
I would say it’s fine as there’s no seals in the last / terminal end just the connecting pieces
 

Reply to Renew outside flue terminal in the UK Plumbing Forum | Plumbing Advice area at PlumbersForums.net

Similar plumbing topics

Hi all. Hope you have all been keeping well. A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to...
Replies
9
Views
351
I want to reconnect some outbuildings to an existing water supply. The supply pipe is old 22mm MDPE and buried for a fair distance so not going...
Replies
1
Views
331
Hello all, I'm would like to extend an existing outside tap to another point in the garden. I'm about to pour a concrete patio and was hoping to...
Replies
6
Views
296
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason...
Replies
3
Views
352
Hi they used to say as a last resort you could discharge the D2 pipework at high level and turn it back to the wall. Similar to a combi boiler. I...
Replies
11
Views
388
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock