Discuss Purge hose in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

Scott_D

Esteemed
Plumber
Gas Engineer
Subscribed
Messages
6,130
Can anyone point me in the direction of a site that sells good quality hoses
looking for something 3/4 or 1" by 20m or longer
Google just throws up diy stores or purge kit hire places
 
I use this hose for draining systems down its brill and proper rubber but only 10m so i have 2,
[DLMURL="http://www.gasboilerparts.co.uk/products/2841-regin-drain-down-hose-kit-,-r09--.html?gclid=CjkKEQjwrLSdBRDYvIL0soO4vo0BEiQABALkqbQV3mBUGkKeG2-58zfA2GJRSEmkUh-SM2nR_HQShZvw_wcB"]REGIN PRODUCTS | REGR09 | Regin Drain-Down Hose Kit , R09 .[/DLMURL]
 
Last edited by a moderator:
Ok no probs , why so big can you not reduce it down ???
 
Where can you get the jubilee clips on them regin hoses the ones with the fan cock on them so you can adjust them by hand?

When i lost my ones i bought new but any will do theyre called butterfly clips
 
They come with handles on them and far easier to use and the handles come in every colour not that it matters
 
Ok no probs , why so big can you not reduce it down ???

Won't achieve the purge time

Not only that but gas can cavitate leaving you with layers of air, achieving the purge time means you've hit the velocity required to minimise / eliminate the probability of that occurring.

This might sound daft Scott but try a tropical fish shop. I was in one the other week and noticed they sell large bore corrugated pipe. I found myself eyeing that up instead of the fish I originally went in there for!
 
uqanyhap.jpg
 
Status
Not open for further replies.

Reply to Purge hose in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Newest Plumbing Threads

Back
Top