Search the forum,

Discuss Poor Transit in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
B

Billy Bob Bob

Time has come to put the old reliable beast to bed,never broken down,but the underside has terminal,uncurable rot,Rip transit
 

Attachments

  • IMG_20160709_081108001_HDR.jpg
    IMG_20160709_081108001_HDR.jpg
    97.5 KB · Views: 62
Last edited by a moderator:
You could park that in a field and it would do free advertising for you. :smile:
Think the law allows advertising on any moveable object on wheels.
Strange that Ford has always made Transits that rust badly. Just a little bit less rust prone and they would be even more popular. They are one of few vehicles that rust quickly nowadays
 
The main reasons I wont own a transit is because Ive seen some less than 3yrs old starting to rot away
 
Strange my old Transit is 14 years old (52 plate) no body rust anywhere and still going strong.WP_20140724_006.jpg
 
A manufacturer cant sell so many vehicles if they are that bad, the transit is a prime example of a good tool
 
Status
Not open for further replies.

Reply to Poor Transit in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi all Noticed bad smell in my drain out side put my hand down and it unclogged it for now however I checked my sewer drain and after flushing my toilet a good few times nothing is going to the sewer so don't know is there a blockage or what way it works many thanks and advice would be grateful
Replies
3
Views
520
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
3
Views
252
Has anyone one fit or serviced one of these before; Heatrae Sadia 25l 9004010. It a 25 litre hot water storage cylinder.
Replies
39
Views
675
Hi All I have a leak coming from within my Mira Elite QT shower. It seems to be flowing from behind the switching Control. Any ideas what could be causing this leak. Already Changed the Pump Elbow as one of the clips had popped which was causing a second small leak, Any idea? Is it time to buy...
Replies
0
Views
234
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new brackets, dismantle that existing one and start again or I could try and re attach via those screws, removing the broken ones from the plate and wall...
Replies
1
Views
201
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock