Discuss PLACEMENT OF ADEY'S MAGNACLEAN FILTER in the DIY Plumbing Forum area at PlumbersForums.net

C

CHRISTOPHER2023

Good morning I have a Adey's magnaclean filter fitted onto the flow pipe ,and when i had it serviced the plumber said all that is going into it was clean water and it should be on the return ? can you help.
 
You should really get that installed onto the return, as close to the boiler as possible. I have been to boilers not even 12 months old with blocked plate heat exchangers and sticking/leaking diverters as all the dirt in system gets filtered by the boiler and not the filter! It can also affect any sort of manufacturers warranty not being on the return.
 

Reply to PLACEMENT OF ADEY'S MAGNACLEAN FILTER in the DIY Plumbing Forum area at PlumbersForums.net

Similar plumbing topics

  • Question
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold...
Replies
2
Views
217
I have a plumber coming tomorrow to change a cartridge on a badly dripping tap on my bathroom mixer unit. There is no separate isolating valve for...
Replies
1
Views
303
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason...
Replies
3
Views
335
I want to reconnect some outbuildings to an existing water supply. The supply pipe is old 22mm MDPE and buried for a fair distance so not going...
Replies
1
Views
318
I was stupid enough not to check the position of the pipes under the tiles when installing a toilet and drilled right through the center of a 16...
Replies
0
Views
236

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock