Search the forum,

Discuss osma gold pipe in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
D

dave1

hi i have come across this pipe it was 22mm and looks excatly like hep, does anyone have any info on this pipe, ie: where do you get it, how do you get the fittings of the pipe. i had a job where the plastic pipe popped out of the fitting, made a bit of a mess as 22mm main running through loft space.
 
Osma gold appeared on the scene 2-3 years ago,mainly on new build contract so spec on some jobs, and promptly disapeared as believe Hep2o bought them out - one way of getting rid of competition!

Seemed like a good product and very cheap when introducing it for contract use. Need special tool to de-mount it, not as user friendly as Hep/JG speedfit and more for professional market than DIY'er.

Had a couple of fittings fail and hard to fix as grab rings on fittings are one shot use. Fittings still floating about - try fleabay or merchants / Osma rep.

22mm Osma Gold plumbing pushfit coupling on eBay (end time 28-Sep-09 20:02:17 BST)

Good luck!
 
thanks sounds exactly right as flats were built around 3 years ago, i replaced the elbow with a hep 2o elbow and seems fine,
 
Status
Not open for further replies.

Reply to osma gold pipe in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Copper pipes, I think its fair to say, is not what it used to be, the copper is getting thin while the cost is going up. Meanwhile, plastic Pushfit seems to be getting better and better, cost and convenience was always better, but now the quality is to, have we reached a stage where plastic will...
Replies
2
Views
252
B
    • Friendly
Hi, I've followed this excellent forum for several years but have never posted, so decided I'd better give some details. My status is the upper end of DIY and I've a couple of house renovations under my belt (my own homes) I am retired but do volunteer handyman jobs for the elderly. Not...
Replies
2
Views
92
I was stupid enough not to check the position of the pipes under the tiles when installing a toilet and drilled right through the center of a 16 mm copper water pipe. I exposed the pipe by removing a ~30cm section of the plastic sleeve and a ~10 cm section of the pipe around the hole. Several...
Replies
0
Views
189
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
136
S
Hi, I seemed to have a blockage in kitchen sink. A plumber came and cleared all the pipework that is visible inside my home (there was debris and pebbles!) We saw that the pipe that takes water down the gutter was visibly full to the top. He said he will return with a coil to push through...
Replies
1
Views
64
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock