Discuss organising vans in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Because you need at least 4. No matter how big or brightly coloured they may be, they are the most elusive thing in the tool box. It is like you open the box and they all go walkabout. Somehow they always find their way back to the box again when it is time to go.
mine dont,numptys on site
 
agreed with the tapes, also as soon as you get power cords of drills extention leads and vac's with in 2 feet of each other they tangle to ****
 
I find when I'm up the top of the ladder with a core drill the bloody plug comes adrift.
 
It's also a lot heavier. Can't see the need of it if you use an rcd extension.
 
Finally got round to giving the van a quick tidy up, still not perfect but getting used to it now, need some better lighting and some insulation/carpet on the sides/roof for sure as I'll be sleeping in it for the Wales rally in September.
 

Attachments

  • IMAG0664.jpg
    IMAG0664.jpg
    88.2 KB · Views: 177
  • IMAG0666.jpg
    IMAG0666.jpg
    91.6 KB · Views: 170
  • IMAG0667.jpg
    IMAG0667.jpg
    89.9 KB · Views: 160
Finally got round to giving the van a quick tidy up, still not perfect but getting used to it now, need some better lighting and some insulation/carpet on the sides/roof for sure as I'll be sleeping in it for the Wales rally in September.

Are your power tools safe there , no strong box
 
I used to install vehicle security systems for a living, you could say that it's secure :wink_smile:
 
Status
Not open for further replies.

Reply to organising vans in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi guys Bit of frustrating situation, I was preparing to solder a 15mm Tee by lining it up to get the positioning right, etc and it was quite...
Replies
4
Views
193
Hi I had to remove the glass panels from this quadrant shower cubicle and I'm struggling to get one of the screens back in place properly. The...
Replies
3
Views
354
Hi Everyone, I hope someone might be able to help please. I hope this isn't a daft question. I am trying to remove the side panels on my...
Replies
2
Views
438
Hi guys I am putting some blinds up. Which screws/all plugs are best for plasterboard window frames ?? I've got stud detector, drills etc as...
Replies
3
Views
500
Hi guys, first post here So I have been boxing in a number of heating pipes that are throughout my garage since the boiler was located there by...
Replies
1
Views
240

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock