Nvq lvl 2 trainee/apprentice seeks work

[Mr learner]

Hi
Would you consider taking on an apprentice plumber/ plumbers mate or plumbers labouror ect
I'm 25 yrs old and very mature. With 5 yrs experience of working on sites as a painter/labouror and I've just completed my nvq lvl 2 in heating and ventilation. Now I just need some good experience with a plumber.
I paid for my own course and studied at bexleyheath college for the last 2 years.
I live in plumstead se London and can travel around London to work. I'm a cscs card and utr number holder.

If you have a job or know someone who has a job or even seen one advertised please contact me on the forum.
I can do a trial or start as a labouror ect just looking to get my foot in the door.
I'm a loyal hard worker and ideally I'm looking for a long term job.


Thanks
LEE

 

[zeljuga]

Hi Lee

Call me for interview on 0845 4755 519
Z M

 

[Mr learner]

Well since the time I made this ad. I rang the time waster who responded.
i also found a plumber to give me some experience mainly I helped to do boiler installs and did some callouts.


i can now do some basic boiler repairs like clean out or replace plate heat exchange
pump up the expansion vessel
change/clean prv
change diverter valve


i can replace trvs
swap/move install a rad
drain down/fill up
solder
do runs in copper or hep
i can do full power flush
ive installed 2 mixer showers
done some gas runs and installed bayonet and cooker then wired it up
done drop tests
chased out for electrics then plastered over it
patched in flues with cement
stripped out boilers/tanks,cylinders
i can wire up thermostats and the remote ones with a transceiver
drill out flue holes use a core cutter, hilti, angle grinder ect


i have a drill, hand tools and a soldering kit
the guy I worked for taught me these things and probably a few more that I've missed.
at the moment he has no work for me that's why I'm looking he would also provide a reference




if you have any offers please get in touch cheers