Discuss No cooker bracket on safety inspection? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

macka09

Plumbers Arms member
Plumber
Gas Engineer
Messages
1,226
Hi guys.

What label should I be using for a cooker with no bracket or chain?

Should I be isolating supply?
 
No. It's NCS under GIUSP. Under the old rules you could issue a warning notice. Under the new rules, just make a note of it and advise landlord. I prefer to do it in writing (email) but that's not a requirement AFAIK.
 
Cant you ask the LL if he wants you to fit a chain? 10 minutes work.
 
just put a chain on and charge the land lord a few quid to fit it iaw mfis
 
Status
Not open for further replies.

Reply to No cooker bracket on safety inspection? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is...
Replies
5
Views
563
Hi, I’m having a gas cooker pipe capped off. The GS registered plumber/ fitter, has told me that to do this, he’ll also have to service the combi...
Replies
3
Views
214
I’m experimenting with the installation of a floating countertop / basin. At the top of the picture are the brackets I’m considering using. Below...
Replies
9
Views
331
Hi, my mother had an electric cooker installed yesterday. The guy who fitted it said it shouldn't be close to the gas pipe but it is. The red...
Replies
5
Views
1K
Hey guys, I'm new to the forum but it looks great so far. I have a question about classifying a cooker .... Is a cooker with missing knobs AR or...
Replies
2
Views
582
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock