Search the forum,

Myson Hi-line RC 7-4 venting

Post new thread

Discuss Myson Hi-line RC 7-4 venting in the DIY Plumbing Forum area at PlumbersForums.net

Z

zely330

Messages
4
Hi all, new here, I have a Myson Hi-line RC 7-4 that doesnt seem to have any water flow. It hasn't been used since last winter and when I tried to use it when it turned cold, it wouldn't work in automatic mode as there seems to be no water flowing through it. Does anyone know how to vent/bleed it in case there is an airlock? Thanks
 

Attachments

  • 2DD250A8-4145-4303-B300-794DE7F03892.png
    2DD250A8-4145-4303-B300-794DE7F03892.png
    315.4 KB · Views: 14
Thanks, I'll have another look, I've had the cover off before but didnt notice any bleed points.

I've had a look but can't see any, I've attached some pics if you can point me to where they'll be
 

Attachments

  • IMG_20230106_211633.jpg
    IMG_20230106_211633.jpg
    334.5 KB · Views: 12
  • IMG_20230106_211709.jpg
    IMG_20230106_211709.jpg
    400.8 KB · Views: 11
  • IMG_20230106_211715.jpg
    IMG_20230106_211715.jpg
    188.4 KB · Views: 13
Last edited:
There isn’t any who ever installed it bodged it
 

Reply to Myson Hi-line RC 7-4 venting in the DIY Plumbing Forum area at PlumbersForums.net

Similar plumbing topics

P
Repeated Airlock in Bathroom
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
339
Chuck
C
M
Unvented discharge at high level current regs
Hi they used to say as a last resort you could discharge the D2 pipework at high level and turn it back to the wall. Similar to a combi boiler. I have just looked back through the regs this seems to have changed and it isn't mentioned now. It now mentions if at high level it should be discharged...
Replies
11
Views
267
Matt0029
M
johndave
Outdoor stopcock doesn't fully close
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
3
Views
255
exedon2
exedon2
C
Y Plan, no hot water but heating is working when called
Hi everyone, Looking for a bit of advice, recently went to a job where heating was operating when called for however not for the hot water. I have changed the 3 port actuator Honeywell head however this doesn’t seem to have solved the issue, does this mean that the programmer is faulty? Or is...
Replies
8
Views
294
John.g
J
F
  • Question
No Hot water, Fixed and Broken Again Ideal Logic 24
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold then would get hot water most of the time. Changing the flow cartridge about 2 years ago (when I moved in) solved this problem enough to suffer it as...
Replies
2
Views
140
Lou
Lou
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Tiling Tools for Beginners
British Standards in Tiling BS5389
Tilers Forum
Tiling Tools
Tile Forum
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock