Myson Hi-line RC 7-4 venting

[zely330]

Hi all, new here, I have a Myson Hi-line RC 7-4 that doesnt seem to have any water flow. It hasn't been used since last winter and when I tried to use it when it turned cold, it wouldn't work in automatic mode as there seems to be no water flowing through it. Does anyone know how to vent/bleed it in case there is an airlock? Thanks

 

[ShaunCorbs]

Yes there should be two bleed points on the fins you need to remove the cover

https://www.myson.co.uk/static_files/my/media/downloads/26552_HiLine_manual_UK_WEB.pdf

 

[zely330]

Thanks, I'll have another look, I've had the cover off before but didnt notice any bleed points.

I've had a look but can't see any, I've attached some pics if you can point me to where they'll be

 

[zely330]

I've had a look but can't see any, I've attached some pics if you can point me to where they'll be

 

[ShaunCorbs]

There isn’t any who ever installed it bodged it

 

[zely330]

There isn’t any who ever installed it bodged it

Was installed by council contractors, sounds about right
Thanks for your help.