Search the forum,

Discuss My head is frazzled in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

hammers4spanner

Esteemed
Plumber
Gas Engineer
Subscribed
Messages
7,712
What a flaming day !!!!

Turned up on a job starting 3 bathrooms and new trvs/lockshields on numerous rads lovely couple but talk about question time.

Started off about her oil boiler wanting it updated /removed and asked about ashp/ground source /biomass and oil. They are very much into the eco home so main questions about biomass install costs/govt grants and how much to run .As i have nothing to do with this my limited knowledge was battered especially when asked about how much it would cost to run .

Then after lasts night late escapade potter ton neataheat breakdown phoned up to give them a price and get the well i saw that part on ebay for £25 quid!!!!


Why do we bother lol
 
Are you doing three bathrooms in the same house all together hammers?
They will be sick of the sight of you will they not?
 
Then after lasts night late escapade potter ton neataheat breakdown phoned up to give them a price and get the well i saw that part on ebay for £25 quid!!!!


Why do we bother lol

The question to them would be – Do you want to hear my quote or not?

What's the part?
 
Last edited:
I kinda understand when a customer has no money and struggling… C’mon, 3 bathrooms and the rest…
 
Happy to talk them through the options hammers :44: with some commission your way if it goes ahead :winkiss:
 
Happy to talk them through the options hammers :44: with some commission your way if it goes ahead :winkiss:
How far afield will you go mate. I have had several people ask about this in recent weeks.
 
Ha ha sorry Nos only just saw your response to this. It's right on the coast Bournemouth, Poole lovely for a visit :wink:
 
Status
Not open for further replies.

Reply to My head is frazzled in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

I was stupid enough not to check the position of the pipes under the tiles when installing a toilet and drilled right through the center of a 16 mm copper water pipe. I exposed the pipe by removing a ~30cm section of the plastic sleeve and a ~10 cm section of the pipe around the hole. Several...
Replies
0
Views
187
Hello all, I’m replacing a concrete paving slab patio in the back yard. The original patio used 50mm deep concrete slabs on hardcore & sand. I’m planning to pour a 100mm deep concrete patio on 100mm hardcore. In order to achieve the same final height to line up with the rest of the patio, I...
Replies
6
Views
232
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is a 23.8Kw appliance with all six burners and oven on max. This was installed some 10 years ago and has passed all subsequent Gas Safety inspections as...
Replies
5
Views
453
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock