Search the forum,

Discuss Multimeter in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
When I did the Baxi course they used all fluke multimeters
 
the more you pay the better the bits n bobs, but my wickes special for £20 has served me fine over the last 8 years, does what I need and kept me alive at the same time. If I was a sparky I'd get better but I'm not.
 
I've got the 1090, does all I need. I had a fancy one but dropped it so I'm sticking to cheaper ones now.
 
I used the 1090 for years, does everything you need and cheap as chips. Got a Fluke 106 now which is a lovely bit of kit.

Some of the lads bought one off eBay which is a direct copy of the Fluke and was about £20
 
any multimeter is only as good as the person using it as with most things.:)

the flukes are great but unless you use it every day its prob hard to justify. Use a voltage indicator and proving unit if testing for 230v's and isolation.
 
Cheers, picked up the Regin branded version of the Plumb center 1090 meter today, had to use it earlier aswell and it seems ok so far. Got it for £17.99 from city plumbing.

XE40.jpg
 
Cheers, picked up the Regin branded version of the Plumb center 1090 meter today, had to use it earlier aswell and it seems ok so far. Got it for £17.99 from city plumbing.

XE40.jpg

I've got the plumb center version, had a year or so and it does everything I need and when I break it which I will it won't bother me as it was £20.
 
Didn't see the thread in time but it was me who said about the baxi guy and the plumb center multimeter. It was the 1090 one.

Looks like you made a good choice anyway.
 
Status
Not open for further replies.

Reply to Multimeter in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi all. Hope you have all been keeping well. A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to...
Replies
9
Views
273
Copper pipes, I think its fair to say, is not what it used to be, the copper is getting thin while the cost is going up. Meanwhile, plastic...
Replies
2
Views
296
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4...
Replies
9
Views
417
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is...
Replies
5
Views
535
S
Hi, I seemed to have a blockage in kitchen sink. A plumber came and cleared all the pipework that is visible inside my home (there was debris and...
Replies
2
Views
136
Sonya K
S
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock