Search the forum,

Discuss Manhole lifting keys. in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

stani

Esteemed
Plumber
Gas Engineer
Subscribed
Messages
2,505
Anybody got a set of keys for this type of manhole cover?

image.jpg
 
$_57.JPG
 
Seriously boys, this 5ft x 3ft 6in x 3in thick stone was over an inspection chamber, no lid just the headstone.
image.jpg
 
Do the right black mass, and the stone will lift of its own accord...

sleep tight
 
when I was a nipper, the local cathedral was moving all the headstones to lay new paving for a big walkway around the cathedral. Being kids we all took a short cut across the site, one of our number never made it, the ground opened up under him and down he went to join the smiling skull etc living in that particular hole. I wont forget his wails and screams till I die, kept us amused for weeks chatting about it :)
 
Day 2
4 cut off scaffold tubes and hey presto 1 opened lid.
image.jpg

Hard going, getting it to fit after though.
Probably weighed around 1/2 ton.
 
Status
Not open for further replies.

Reply to Manhole lifting keys. in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

IS IT POSSIBLE TO ADJUST THIS MIXER UNIT? WE HAVE TO HAVE IT TURNED ALMOST FULLY ANTI CLOCKWISE TO GET HOT WATEROUT. THE FRONT PLATE WITH MIRA ON IT PRISES OFF AND INSIDE THERE ARE SOME PLASTIC BITS AND A SMALL CROSS-HEAD SCREW IN THE MIDDLE. THANKS
Replies
6
Views
224
Hi, basic question, any insight much appreciated. Looking to have an outdoor tap in my front porch fed from 15mm pex coming up from suspended floor. Pic 1 is inside porch, pex temporarily clipped to give an idea of pipe placement (ignore shoddy blockwork of booted cowboy builder!), Pic 2 is...
Replies
6
Views
221
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
3
Views
238
Hi All I have a leak coming from within my Mira Elite QT shower. It seems to be flowing from behind the switching Control. Any ideas what could be causing this leak. Already Changed the Pump Elbow as one of the clips had popped which was causing a second small leak, Any idea? Is it time to buy...
Replies
0
Views
227
Hi guys. I'm trying to identify a toilet model before ordering a seat for a customer. I went to what used to be a Roca stockist (they no longer are) and one of the guys there reckoned it might be "The Gap". I went to the new stockist and the guy there disagreed it was "The Gap" and that he'd...
Replies
2
Views
132
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock