Search the forum,

Discuss Junior plumbing vacancy required in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Hello
Im 18 and have just completed a 2 year couse at college in plumbing. I have my city & guilds qualification and am looking for a job in and around maidstone. Tonbridge ir tunbridge wells. Any assistance would be appreciated.
 
Ah well your loss.

Disagree all you want, but if you don't stand out you're just one of the flock and easily over looked.


On another note wouldn't it be easier for training centres to only train people with an employer?
Seems a real glut of people with worthless plumbing certs but not completed their nvq.
 
Last edited:
Most on here will agree with the above mate. My advice would be to contact as many local firms as possible and show them something within you that they haven’t seen about before.
 

Reply to Junior plumbing vacancy required in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi all. Hope you have all been keeping well. A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to space for servicing and changing parts if ever needing to. I am finding my decision rather hard due to the different clearances on flue runs and cupboards...
Replies
9
Views
261
I am in process of replacing an existing sink with a new stainless steel one. The existing tap is plumbed directly to copper which means that it is earthed. The new tap will use flexible tails and so will not be earth bonded. My initial search for information suggests that there is no legal...
Replies
6
Views
289
Hello, I am seeking some advice, I have a POTTERTON PROMAX 28 COMBI Boiler and I noticed yesterday that the water around the house is no longer warming up. The heat exchanger has been changed 6 months ago, so I do not believe it is that. Does anyone have any ideas on what it could be? Thanks
Replies
4
Views
275
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
180
Hi everyone, Looking for a bit of advice, recently went to a job where heating was operating when called for however not for the hot water. I have changed the 3 port actuator Honeywell head however this doesn’t seem to have solved the issue, does this mean that the programmer is faulty? Or is...
Replies
8
Views
353
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock