Discuss Interesting use of plumbing skills in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
G

Garryaca@yahoo.

Useing a few tricks of the trade on my cargo bike!

[DLMURL="http://www.flickr.com/photos/13725084@N05/4338378222"]DSC09219 on Flickr - Photo Sharing![/DLMURL]

[DLMURL="http://www.flickr.com/photos/13725084@N05/4338377694"]DSC09217 on Flickr - Photo Sharing![/DLMURL]

[DLMURL="http://www.flickr.com/photos/13725084@N05/4338377168"]DSC09216 on Flickr - Photo Sharing![/DLMURL]

[DLMURL="http://www.flickr.com/photos/13725084@N05/4338376702"]DSC09215 on Flickr - Photo Sharing![/DLMURL]

[DLMURL="http://www.flickr.com/photos/13725084@N05/4338378222"]DSC09219 on Flickr - Photo Sharing![/DLMURL]
 
Last edited by a moderator:
i bet the fittings are worth more than the bike.R.O.F.L:D:D:D.
i did see a programme recently where a plumber was using his motorbike for work,tooled up and all that,the police who pulled him over were not too impressed though:)
si
 
Ingenious!

I recently bent a piece of 22mm for a shower rail. Customer was really chuffed - and I was too - 3 bends and only 1mm out and ended up totally flat when laid on the floor - fluke!
 
if it were i, i would consider remaking the whole bike with 28mm and guttering for the mud guard.
good rolling add.
i started of as a pipe welder at ralliegh bikes, not much difference.
 
I did get a funny look from the guy at the plumb centre when I turned up on a push bike and bought 3 metres of tube!..

(sliced it in half and strapped it to the top tube)
 
I did get a funny look from the guy at the plumb centre when I turned up on a push bike and bought 3 metres of tube!..

(sliced it in half and strapped it to the top tube)
i remember when all the gas board fitters had push bikes to go out doing the small jobs these were the days before flexi,s on cookers and they were hard piped wasnt unusual for a cooker to have several nipples and socket joining it as they didnt like having to thread anything
they actuallly had a pipe vice fitted on the bike and a small set of stocks and dies in the panniers and a couple of 4 foots of barrel strapped on the cross bar
 
Status
Not open for further replies.

Reply to Interesting use of plumbing skills in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

H
  • Locked
Hi there - I have a problem with a flexipipe connection for a bathroom tap (tall chrome job for use with bowl-shaped basin that sits on a vanity...
Replies
10
Views
5K
Platinum
P
M
  • Locked
Hello everyone, I'm a self employed sparky currently doing the train 4 trade skills course and as such I have been bringing in small amounts of...
Replies
4
Views
1K
T
T
  • Locked
going to get a new set pipe benders this week and im wondering what all you lads are useing and what you class as werth buying or to stay away...
Replies
21
Views
3K
tiling spread
T
M
  • Locked
Hello people, I am 32 years old and I'm looking at changing my job, plumbing interests me. What is the best route into this industry? My...
Replies
0
Views
1K
Mr Essex
M
A
  • Locked
Hi there New to the forum and new to the world of plumbing :D Im 29 and for the last 10 years have been commuting to Oxford from Birmingham to...
Replies
15
Views
7K
fuzzy
F
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock