Search the forum,

Discuss Installing hive thermostat in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Messages
15
Good evening guys. I need some help fitting my new hive thermostat. First of all, I understood the hive thermostat requires at least 3 wires. I opened my old thermostat and I tried to see which cable is it but I couldn't understand. Can you help me with this?
Please find the picture attached. Thanks a lot!

IMG-20181120-WA0000.jpg
 
You can't fit the hive there as it needs a permanent live, the transmitter is usually fitted near the boiler, using a permanent live from the fused spur. You could connect the existing switched live near the boiler and use that as your call for central heating. This would disconnect the wiring to your existing thermostat seen in the picture, you would then remove this and fit the battery operated hive receiver over the existing hole.
 
So what kind of cable do I need? Can you share a link from where to buy? Like screfix, wicks, etc. Thanks a lot.

Please don't take this the wrong way but if you are asking this I don't think you should be touching it ..........best you consult either a heating engineer, or a spark who does central heating systems ..........
 
So you have had help. But had no help?:D:D Just messing with you. I think that you should really get a heating engineer out.
Please don't take this the wrong way but if you are asking this I don't think you should be touching it ....best you consult either a heating engineer, or a spark who does central heating systems .
As I also stated above. I agree.
 

Reply to Installing hive thermostat in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
135
Hi guys....we have an old Astracast sink top....I think its a composite sink....has a big single bowl. My wife thinks it looks scruffy....looks ok to me.....sound but the bowl has seen a lot of work. So she wants a new one...Astracast it seems are no more. The problem is its size.....looked...
Replies
2
Views
88
Hi all. Hope you have all been keeping well. A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to space for servicing and changing parts if ever needing to. I am finding my decision rather hard due to the different clearances on flue runs and cupboards...
Replies
9
Views
211
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
339
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock