inset gas hob safety cert acceptance

Post new thread

Discuss inset gas hob safety cert acceptance in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
spanner

spanner

Plumbers Arms member
Plumber
Gas Engineer
Messages
1,241
If you were to buy a new inset g hob with the burners and found that the safety devices were Not implicated eg: turn on the gas hob and gas doesn't shut down. Well personally it's highly dangerous.
My question is.
Would this be acceptable.? IMG_20151205_152704.jpg
Or what standard is categorically suitable??View attachment 24088w
 
Status
Not open for further replies.

Reply to inset gas hob safety cert acceptance in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

F
What constitutes a Commercial Appliance and thus a Commercial Kitchen?
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is...
Replies
5
Views
562
FozzieBear
F
D
Covering shallow sewer pipe under concrete Patio
Hello all, I’m replacing a concrete paving slab patio in the back yard. The original patio used 50mm deep concrete slabs on hardcore & sand. I’m...
Replies
6
Views
326
DIwhYdidIstartThis
D

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock