Search the forum,

Discuss HWOS - anyone having problems - have they gone down? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
B

Bunker

I tried to call them yetserday but phone numbers dont work anymore, now the website doesnt load. Just me or anyone else?...
 
Just this minute ordered a bunded tank off of them over the phone :)
 
I can't get the website to load either.

Perhaps they have some gremlins in their system. Lots of phone systems are integrated with IT systems now.
 
if abgo were to produce a catalogue with a price list Id use them, but they dont so cant look things up and give customers a quote, and before you lot say use your phone, muggins works all over exmoor and your lucky to have a road yet alone a phone signal :)
 
I use HWOS or BES for most things, and Screwfix for the bog standard pipe fittings, I notice HWOS have started doing a basic line in copper fittings, will get some to try out.
 
I tried an HWOS oil tank today as ray couldnt match their prices sadley, nice bit of kit once the delivery driver got his 40 ft lorry down the 30 ft lanes :)
 
Status
Not open for further replies.

Reply to HWOS - anyone having problems - have they gone down? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
365
Hi guys. I'm trying to identify a toilet model before ordering a seat for a customer. I went to what used to be a Roca stockist (they no longer are) and one of the guys there reckoned it might be "The Gap". I went to the new stockist and the guy there disagreed it was "The Gap" and that he'd...
Replies
2
Views
153
I have a green star ten yrs old keeps increasing pressure, feel on off filling valve not working, drain off to recommended, but after few days it's increased whilst cold...is this a regular problem.
Replies
1
Views
167
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new brackets, dismantle that existing one and start again or I could try and re attach via those screws, removing the broken ones from the plate and wall...
Replies
1
Views
218
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
3
Views
283
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock